Manual Brother Innov-is M280D (page 53 of 100) (English)

718769

Zoom out

Zoom in

1/100

Utility stitches

VARIOUS STITCHES

■ Darning

1 Reinforcement stitching

Determine the desired length of the darning.

Set the button guide plate on buttonhole foot “A” to the

desired length. (The distance between the markings on

the presser foot scale is 5 mm (3/16 inch).)

• A bar tack with a maximum length of about 28 mm

(1-1/8 inches) can be sewn.

 Once sewing is completed, the machine

automatically sews reinforcement stitches, then

stops.

Attach buttonhole foot “A”.

Position the upper thread under the presser foot by

guiding thread through the hole in the presser foot

before attaching the buttonhole foot “A”.

Select a stitch.

• For details, refer to “Stitch Chart” on page 35.

Position the fabric so that the needle is 2 mm (1/16

inch) in front of the area to be darned, and then lower

the presser foot.

Pull down the buttonhole lever as far as possible.

Gently hold the end of the upper thread in your left

hand, and then start sewing.

After sewing is finished, raise the presser foot lever,

remove the fabric, and then cut the threads.

Raise the buttonhole lever to its original position.

■ Eyelet Stitching

Eyelets, such as those on belts, can be sewn.

Attach monogramming foot “N”.

Select a stitch.

• For details, refer to “Stitch Chart” on page 35.

Adjust either the stitch width or the stitch length to

select the desired eyelet size.

• For details, refer to “Setting the stitch width” on

page 29 and “Setting the stitch length” on page 29.

Lower the needle into the fabric at the beginning of the

stitching, and then lower the presser foot lever.

Start sewing.

 Once sewing is completed, the machine

automatically sews reinforcement stitches, then

stops.

1 Presser foot scale

2 Length of darning

3 5 mm (3/16 inch)

4 7 mm (1/4 inch)

No. 4-11 4-12

Stitch

1 Tear

2 2 mm (1/16 inch)

No. 4-15

Stitch

bonjour
je dois faire des coutures au point droit à 5mm du bord. comment faire le réglage. Merci Submitted on 15-11-2022 at 10:03
Reply Report abuse
bonjour
je souhaite faire des coutures à 0.5 cm avec ma brother 280. Comment faire
Merci bonne journée Submitted on 3-9-2022 at 10:38
Reply Report abuse
message sur brother 280 lorsque la commande de vitesse est réglée pour contrôler la largeur du point zigzag, la touche marche/arrêt ne fonctionne pas. Comment faire pour annuler cette commande Merci de m'aider Submitted on 27-5-2022 at 07:10
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Brother Innov-is M280D in the language / languages: English as an attachment in your email.

The manual is 5,05 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother Innov-is M280D

Brother Innov-is M280D User Manual - German - 100 pages

Brother Innov-is M280D User Manual - Dutch - 100 pages

Brother Innov-is M280D User Manual - French - 100 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Brother Innov-is M280D Manual

Product: