Manual Brother Innov-is M280D (page 45 of 100) (English)

718769

Zoom out

Zoom in

1/100

Utility stitches

VARIOUS STITCHES

Position the fabric with the front end of the buttonhole

mark aligned with the red marks on the sides of the

buttonhole foot, and then lower the presser foot lever.

• When lowering the presser foot, do not push in the

front of the presser foot.

Pull down the buttonhole lever as far as possible.

The buttonhole lever is positioned behind the bracket

on the buttonhole foot.

Gently hold the end of the upper thread in your left

hand, and then start sewing.

 Once sewing is completed, the machine

automatically sews reinforcement stitches, then

stops.

Press (Thread cutter button) once.

Raise the presser foot, and then remove the fabric.

Raise the buttonhole lever to its original position.

Insert a pin along the inside of one bar tack at the end

of the buttonhole stitching to prevent the stitching

from being cut.

Use the seam ripper to cut towards the pin and open

the buttonhole.

For keyhole buttonholes, use the eyelet punch to make

a hole in the rounded end of the buttonhole, and then

use the seam ripper to cut open the buttonhole.

• When using the eyelet punch, place thick paper or

some other protective sheet under the fabric before

punching the hole in the fabric.

1 Mark on fabric

(front)

2 Red marks on

buttonhole foot

3 Upper thread

1 Do not reduce the

gap.

Memo

• If there is difficulty in aligning the marks, slowly turn the

handwheel toward you to check where the needle will

enter the fabric, and then align the mark on the fabric

with that point.

1 Buttonhole lever

2 Bracket

Memo

• When using the thread cutter on the left side of the

machine or scissors to cut the threads, press

(Needle position button) to raise the needle, raise the

presser foot, and then pull out the fabric before cutting

the threads.

1 Pin

1 Seam ripper

1 Eyelet punch

CAUTION

• When opening the buttonhole with the seam

ripper, do not place your hands in the cutting

direction, otherwise injuries may result if the

seam ripper slips.

• Do not use the seam ripper in any other way

than how it is intended.

bonjour
je dois faire des coutures au point droit à 5mm du bord. comment faire le réglage. Merci Submitted on 15-11-2022 at 10:03
Reply Report abuse
bonjour
je souhaite faire des coutures à 0.5 cm avec ma brother 280. Comment faire
Merci bonne journée Submitted on 3-9-2022 at 10:38
Reply Report abuse
message sur brother 280 lorsque la commande de vitesse est réglée pour contrôler la largeur du point zigzag, la touche marche/arrêt ne fonctionne pas. Comment faire pour annuler cette commande Merci de m'aider Submitted on 27-5-2022 at 07:10
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Brother Innov-is M280D in the language / languages: English as an attachment in your email.

The manual is 5,05 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother Innov-is M280D

Brother Innov-is M280D User Manual - German - 100 pages

Brother Innov-is M280D User Manual - Dutch - 100 pages

Brother Innov-is M280D User Manual - French - 100 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Brother Innov-is M280D Manual

Product: