Manual Brother Innov-is M280D (page 44 of 100) (English)

718769

Zoom out

Zoom in

1/100

Utility stitches

Buttonhole sewing

The maximum buttonhole length is about 28 mm (1-1/8

inches) (diameter + thickness of the button).

Buttonholes are sewn from the front of the presser foot to the

back, as shown below.

1 Reinforcement stitching

The part names of buttonhole foot “A”, which is used to create

buttonholes, are indicated below.

Use chalk to mark on the fabric the position and length

of the buttonhole.

Pull out the button guide plate of buttonhole foot “A”,

and then insert the button that will be put through the

buttonhole.

■ If the button does not fit in the button guide

plate

Add together the diameter and thickness of the button,

and then set the button guide plate to the calculated

length. (The distance between the markings on the presser

foot scale is 5 mm (3/16 inch).)

Example: For a button with a diameter of

15 mm (9/16 inch) and a thickness of 10 mm (3/8 inch),

the button guide plate should be set to 25 mm (1 inch) on

the scale.

 The size of the buttonhole is set.

Attach buttonhole foot “A”.

Position the upper thread under the presser foot by

guiding thread through the hole in the presser foot

before attaching the buttonhole foot “A”.

Select a stitch.

• For details, refer to “Stitch Chart” on page 35.

1 Button guide plate

2 Presser foot scale

3 Pin

4 Marks on

buttonhole foot

5 5 mm (3/16 inch)

Note

• Before sewing buttonholes, check the stitch length and

width by sewing a trial buttonhole on a scrap piece of

fabric used for your project.

1 Marks on fabric

2 Buttonhole sewing

1 Presser foot scale

2 Length of

buttonhole

(diameter +

thickness of

button)

3 5 mm (3/16 inch)

1 10 mm (3/8 inch)

2 15 mm (9/16 inch)

No. 4-01 4-02 4-03 4-04 4-05

Stitch

No. 4-06 4-07 4-08 4-09 4-10

Stitch

bonjour
je dois faire des coutures au point droit à 5mm du bord. comment faire le réglage. Merci Submitted on 15-11-2022 at 10:03
Reply Report abuse
bonjour
je souhaite faire des coutures à 0.5 cm avec ma brother 280. Comment faire
Merci bonne journée Submitted on 3-9-2022 at 10:38
Reply Report abuse
message sur brother 280 lorsque la commande de vitesse est réglée pour contrôler la largeur du point zigzag, la touche marche/arrêt ne fonctionne pas. Comment faire pour annuler cette commande Merci de m'aider Submitted on 27-5-2022 at 07:10
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Brother Innov-is M280D in the language / languages: English as an attachment in your email.

The manual is 5,05 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother Innov-is M280D

Brother Innov-is M280D User Manual - German - 100 pages

Brother Innov-is M280D User Manual - Dutch - 100 pages

Brother Innov-is M280D User Manual - French - 100 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Brother Innov-is M280D Manual

Product: