Manual Brother Innov-is M280D (page 18 of 100) (English)

718769

Zoom out

Zoom in

1/100

Winding/Installing the Bobbin

Installing the bobbin

Install the bobbin wound with thread.

You can begin sewing immediately without pulling up the

bobbin thread by simply inserting the bobbin in the bobbin

case and guiding the thread through the slit in the needle

plate cover.

Turn on the machine.

Press (Needle position button) once or twice to

raise the needle.

Press .

 The screen changes, and all keys and operation

buttons are locked (except ).

Raise the presser foot lever.

Slide the bobbin cover latch to the right and remove

the bobbin cover.

Insert the bobbin into the bobbin case so that the

thread unwinds to the left.

Lightly hold down the bobbin with your right hand

(1), and then guide the end of the thread around the

tab of the needle plate cover with your left hand (2).

While lightly holding down the bobbin with your right

hand (1), guide the thread through the slit in the

needle plate cover (2) and lightly pull it with your left

hand (3).

Memo

• If the threads will be pulled to create gathers or the

thread at the beginning of sewing will be finished, for

example, when free motion quilting, first pull up the

bobbin thread.

For details, refer to “Pulling up the bobbin thread” on

page 20.

CAUTION

• Use a bobbin that has been correctly wound

with thread, otherwise the needle may break

or the thread tension will be incorrect.

• Before inserting or changing the bobbin, be

sure to press on the operation panel to

lock all keys and buttons, otherwise injuries

may occur if the “Start/Stop” button or any

other button is pressed and the machine starts.

1 Tab

CAUTION

• Be sure to hold down the bobbin with your

finger and unwind the bobbin thread

correctly, otherwise the thread may break or

the thread tension will be incorrect.

Memo

• By guiding the thread around the tab of the needle plate

cover, passing the thread as shown by 2 in this

illustration, then lightly pulling the thread at 3, the

thread will enter the tension spring of the bobbin case to

apply the appropriate tension to the bobbin thread

during sewing.

bonjour
je dois faire des coutures au point droit à 5mm du bord. comment faire le réglage. Merci Submitted on 15-11-2022 at 10:03
Reply Report abuse
bonjour
je souhaite faire des coutures à 0.5 cm avec ma brother 280. Comment faire
Merci bonne journée Submitted on 3-9-2022 at 10:38
Reply Report abuse
message sur brother 280 lorsque la commande de vitesse est réglée pour contrôler la largeur du point zigzag, la touche marche/arrêt ne fonctionne pas. Comment faire pour annuler cette commande Merci de m'aider Submitted on 27-5-2022 at 07:10
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Brother Innov-is M280D in the language / languages: English as an attachment in your email.

The manual is 5,05 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother Innov-is M280D

Brother Innov-is M280D User Manual - German - 100 pages

Brother Innov-is M280D User Manual - Dutch - 100 pages

Brother Innov-is M280D User Manual - French - 100 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Brother Innov-is M280D Manual

Product: