718768
46
Zoom out
Zoom in
Previous page
1/52
Next page
Troubleshooting
44
After embroidering
A bobbin designed specifically for this machine is
not used.
11
Upper threading is incorrect. 15
Bobbin is set incorrectly. 13
Embroidery foot is attached incorrectly. 41
Stabilizer is not attached to fabric being
embroidered.
21
Bobbin thread is incorrectly wound. 11
Upper thread breaks.
Machine is not threaded correctly (used the
wrong spool cap, spool cap is loose, the thread
did not catch the needle bar threader, etc.).
15
Knotted or tangled thread is being used.
Upper thread tension is too tight. 29
Thread is tangled. 39
Needle is turned, bent or the point is dull. 18
Needle is installed incorrectly. 18
There are scratches near the hole in the
embroidery foot.
*
There are scratches on the bobbin case. *
Using improper needle or thread for the selected
fabric.
18
A bobbin designed specifically for this machine is
not used.
11
The thread is tangled on the wrong side of the fabric.
Upper threading is incorrect. 15
Using improper needle or thread for the selected
fabric.
18
The upper thread is too tight.
The bobbin thread is incorrectly installed. 13
Bobbin thread breaks.
Bobbin is set incorrectly. 13
Bobbin thread is incorrectly wound. 11
A scratched bobbin is being used. 13
Thread is tangled. 39
A bobbin designed specifically for this machine is
not used.
11
Symptom, Cause/solution
Reference
Fabric puckers.
There is a mistake in the upper or bobbin
threading.
11, 15
Spool of thread is set incorrectly. 11
Needle is turned, bent or the point is dull. 18
Skipped stitches
Machine is threaded incorrectly. 11, 15
Needle is turned, bent or the point is dull. 18
Needle is installed incorrectly. 18
Dust or lint has collected under the needle plate. 39
Not embroidering
Needle is turned, bent or the point is dull. 18
Bobbin is set incorrectly. 13
Upper threading is incorrect. 15
High-pitched sound while embroidering
Pieces of thread are caught in the race. 39
Upper threading is incorrect. 15
A bobbin designed specifically for this machine is
not used.
11
There are needle holes or friction scratches in the
bobbin case.
*
The needle contacts the needle plate.
The needle clamp screw is loose. 18
Needle is turned, bent or the point is dull. 18
The handwheel does not turn smoothly.
Thread is tangled in the bobbin case. 39
Symptom, Cause/solution
Reference
Thread tension is incorrect.
Upper threading is incorrect. 15
Bobbin is set incorrectly. 13
Using improper needle or thread for the selected
fabric.
18
Thread tension is set incorrectly. 29
Symptom, Cause/solution
Reference
46


Need help? Post your question in this forum.

Forumrules
1

Forum

brother-innov-is-m240ed

Reset search

  • HI!
    Is there the M240ED User Manual in Portuguese??

    Thank you Submitted on 29-8-2023 at 18:42

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother Innov-is M240ED at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother Innov-is M240ED in the language / languages: English as an attachment in your email.

The manual is 2,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother Innov-is M240ED

Brother Innov-is M240ED User Manual - German - 52 pages

Brother Innov-is M240ED User Manual - Dutch - 52 pages

Brother Innov-is M240ED User Manual - French - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info