718768
45
Zoom out
Zoom in
Previous page
1/52
Next page
Troubleshooting
43
APPENDIX
3
If the machine stops operating correctly, check the
following possible problems before requesting service.
You can solve most problems by yourself. If you need
additional help, the Brother Solutions Center offers the
latest FAQs and troubleshooting tips. Visit us at “ http://
s.brother/cpjae ”.
If the problem persists, contact your Brother dealer or the
nearest Brother authorized service center.
List of symptoms
Check the following possible problems before requesting
service. If the reference page is “*”, contact your authorized
Brother dealer or the nearest Brother authorized service
center.
Getting ready
While embroidering
Troubleshooting
Symptom, Cause/solution
Reference
Cannot thread the needle.
Needle is not in the correct position.
Press the “Needle position” button to raise the
needle.
6
Needle is installed incorrectly. 18
Needle is turned, bent or the point is dull. 18
Upper threading is incorrect.
The needle threader lever is not lowered until it
clicks.
15
The needle threader hook is bent and does not
pass through the eye of the needle.
*
The needle threader lever cannot be moved or
returned to its original position.
*
Bobbin thread does not wind neatly on the bobbin.
The thread is not passed through the bobbin
winding thread guide correctly.
11
The thread that was pulled out from the bobbin-
winding thread guide was incorrectly wound onto
the bobbin.
13
The empty bobbin was not set on the pin
properly.
11
While winding the bobbin, the bobbin thread was
wound below the bobbin winder seat.
The thread was incorrectly passed under the
pretension disk on the bobbin-winding thread
guide.
Remove any entangled thread, and then wind
the bobbin.
11, 42
The bobbin thread cannot be pulled up.
Bobbin is set incorrectly. 13
Nothing appears in the LCD.
Main power switch is not turned on. 9
The plug of the power cord is not inserted into an
electrical outlet.
9
The LCD screen is fogged up.
Condensation has formed on the LCD screen.
After a while, the cloudiness will disappear.
The operation keys do not respond, or the key
response is too sensitive.
A glove is worn when the keys are pressed.
The keys are pressed with a fingernail.
A non-electrostatic touch pen is being used.
The sensitivity of the operation keys is not set for
the user.
6, 11
The machine light does not come on.
[Light] is set to [OFF] in the settings screen. 10
Embroidery unit does not operate.
Embroidery unit is not attached correctly. 19
Symptom, Cause/solution
Reference
Machine does not operate.
“Start/Stop” button was not pressed. 6
The bobbin winder shaft is pushed to the right. 11
There is no pattern selected. 24
Presser foot is not lowered. 16
Needle breaks.
Needle is installed incorrectly. 18
Needle clamp screw is not tightened. 18
Needle is turned or bent. 18
Using improper needle or thread for the selected
fabric.
18
Upper thread tension is too tight. 29
Spool of thread is set incorrectly. 11
There are scratches around the opening in the
needle plate.
*
There are scratches around the opening in the
presser foot.
*
There are scratches on the bobbin case. *
Symptom, Cause/solution
Reference
45


Need help? Post your question in this forum.

Forumrules
1

Forum

brother-innov-is-m240ed

Reset search

  • HI!
    Is there the M240ED User Manual in Portuguese??

    Thank you Submitted on 29-8-2023 at 18:42

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother Innov-is M240ED at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother Innov-is M240ED in the language / languages: English as an attachment in your email.

The manual is 2,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother Innov-is M240ED

Brother Innov-is M240ED User Manual - German - 52 pages

Brother Innov-is M240ED User Manual - Dutch - 52 pages

Brother Innov-is M240ED User Manual - French - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info