718739
74
Zoom out
Zoom in
Previous page
1/132
Next page
Zipper Insertion
S-20
* Stitch patterns can be selected directly by pressing the
numeric keys on the machine during preset utility stitch
mode. Refer to “Basic operations” section.
Inserting a centered zipper
Stitching is sewn on both pieces of fabric butted against each
other.
1 Right side of fabric
2 Stitching
3 End of zipper opening
a
Attach zigzag foot “J”.
b
Sew straight stitches up to the zipper opening.
With the right sides of the fabric facing each other, sew
reverse stitches after reaching the zipper opening.
c
Using a basting stitch, continue sewing to the edge of
the fabric.
1 Basting stitching
2 Reverse stitches
3 Wrong side of fabric
4 End of zipper opening
d
Press open the seam allowance from the wrong side of
the fabric.
1 Wrong side of fabric
e
Align the seam with the center of the zipper, and then
baste the zipper in place.
1 Wrong side of fabric
2 Basting stitching
3 Zipper
f
Remove about 5 cm (2 inches) from the end of the
basting on the outside.
1 Wrong side of fabric
2 Zipper basting
3 Outside basting
4 5 cm (2 inches)
g
Attach the presser foot holder to the right pin of zipper
foot “I”.
1 Pin on the right side
2 Needle drop point
Zipper Insertion
Stitch name Stitch
Presser foot
Stitch number
Straight stitch (Middle)
03
*
J, I
1
2
3
1
2
3
4
1
1
2
3
4
1
2
3
2
1
I
74


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother Innov-is F410 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother Innov-is F410 in the language / languages: English as an attachment in your email.

The manual is 3,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother Innov-is F410

Brother Innov-is F410 User Manual - German - 132 pages

Brother Innov-is F410 User Manual - Dutch - 132 pages

Brother Innov-is F410 User Manual - French - 132 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info