718740
13
Zoom out
Zoom in
Previous page
1/112
Next page
Operation Manual
Sewing Machine
Product Code: 888-H22
Be sure to read this document before using the machine.
We recommend that you keep this document nearby for future reference.
INTRODUCTION
i
Thank you for purchasing this machine. Before using this machine, carefully read the “IMPORTANT SAFETY
INSTRUCTIONS”, and then study this manual for the correct operation of the various functions.
In addition, after you have finished reading this manual, store it where it can quickly be accessed for future reference.
Please read these safety instructions before attempting to use the machine.
DANGER - To reduce the risk of electrical shock
1Always unplug the machine from the electrical outlet immediately after using, when cleaning, making any user
servicing adjustments mentioned in this manual, or if you are leaving the machine unattended.
WARNING - To reduce the risk of burns, fire, electrical shock, or injury to
persons.
2Always unplug the machine from the electrical outlet when making any adjustments mentioned in the instruction
manual.
To unplug the machine, switch the machine to the symbol “O” position to turn it off, then grasp the plug and pull
it out of the electrical outlet. Do not pull on the cord.
Plug the machine directly into the electrical outlet. Do not use an extension cord.
Always unplug your machine if there is a power failure.
3Electrical Hazards:
This machine should be connected to an AC power source within the range indicated on the rating label. Do not
connect it to a DC power source or converter. If you are not sure what kind of power source you have, contact a
qualified electrician.
This machine is approved for use in the country of purchase only.
4Never operate this machine if it has a damaged cord or plug, if it is not working properly, has been dropped or
damaged, or water is spilled on the unit. Return the machine to the nearest authorized Brother dealer for
examination, repair, electrical or mechanical adjustment.
While the machine is stored or in use if you notice anything unusual, such as an odor, heat, discoloration or
deformation, stop using the machine immediately and unplug the power cord.
When transporting the machine, be sure to carry it by its handle. Lifting the machine by any other part may
damage the machine or result in the machine falling, which could cause injuries.
When lifting the machine, be careful not to make any sudden or careless movements, which may cause a
personal injury.
INTRODUCTION
IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
iii
SAVE THESE INSTRUCTIONS
This machine is intended for household use.
FOR USERS IN COUNTRIES EXCEPT EUROPEAN COUNTRIES
This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction concerning use of the
appliance by a person responsible for their safety. Children should be supervised
to ensure that they do not play with the appliance.
FOR USERS IN EUROPEAN COUNTRIES
This appliance can be used by children aged from 8 years and above and persons
with reduced physical, sensory or mental capabilities or lack of experience and
knowledge if they have been given supervision or instruction concerning use of the
appliance in a safe way and understand the hazards involved. Children shall not
play with the appliance. Cleaning and user maintenance shall not be made by
children without supervision.
FOR USERS IN THE UK, EIRE, MALTA
AND CYPRUS ONLY
IMPORTANT
In the event of replacing the plug fuse, use a fuse approved by ASTA to BS 1362, i.e. carrying the mark,
rating as marked on plug.
Always replace the fuse cover. Never use plugs with the fuse cover omitted.
If the available electrical outlet is not suitable for the plug supplied with this equipment, you should contact your
authorized Brother dealer to obtain the correct lead.
CONTENTS
vi
A Appendix
Chapter 1 MAINTENANCE AND
TROUBLESHOOTING 2
Care and Maintenance.......................................... 2
Restrictions on oiling.............................................................. 2
Precautions on storing the machine........................................ 2
Cleaning the LCD screen........................................................ 2
Cleaning the machine surface ................................................ 2
Cleaning the race ................................................................... 2
Troubleshooting.................................................... 4
Frequent troubleshooting topics ............................................. 4
Upper thread tightened up ..................................................... 4
Tangled thread on wrong side of fabric .................................. 5
Incorrect thread tension.......................................................... 6
Fabric is caught in the machine and cannot be removed ........ 7
If the thread becomes tangled under the bobbin winder
seat ...................................................................................... 10
Error message “E06” appears in the LCD .............................. 11
List of symptoms................................................................... 13
Error messages...................................................................... 19
Operation beep .................................................................... 20
Index .................................................................. 21
Basic
operations
This section provides details on the initial setup procedures as well as descriptions of this
machine’s more useful functions.
Page number starts with “B” in this section.
Chapter1 GETTING READY....................................................B-2
Chapter2 STARTING TO SEW ..............................................B-29
Names of Machine Parts and Their Functions
GETTING READY
Basic operations B-5
B
Included accessories
Included accessories may differ from the table below depending on your model. For more details on included accessories and
their part codes of your machine, refer to the Quick Reference Guide.
1. 2. 3. 4. 5. 6.
Zigzag foot “J” (on
machine)
Monogramming foot “N” Overcasting foot “G” Zipper foot “I” Blind stitch foot “R” Button fitting foot “M”
7. 8. 9. 10. 11. 12.
Buttonhole foot “A
Needle set
*1
Twin needle
*2
Bobbin (4)
(One is on machine.)
Seam ripper Cleaning brush
13. 14. 15. 16. 17. 18.
Eyelet punch Screwdriver Disc-shaped screwdriver Horizontal spool pin Spool cap (large) Spool cap (medium) (2)
(One is on machine.)
19. 20. 21. 22. 23. 24.
Spool cap (small) Thread spool insert (mini
king thread spool)
Spool net Bobbin case
(on machine)
Foot controller Accessory bag
25. 26.
Operation Manual Quick Reference Guide
*1
75/11 2 needles,
90/14 2 needles,
90/14 2 needles: Ball point needle (gold colored)
*2
2/11 needle
Note
(For U.S.A. only) Foot controller: Model T
This foot controller can be used on the machine with product code 888-H22. The product code is mentioned on
the machine rating plate.
J
N
G
I
R
M
A
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother Innov-is F400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother Innov-is F400 in the language / languages: English as an attachment in your email.

The manual is 3,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother Innov-is F400

Brother Innov-is F400 User Manual - German - 112 pages

Brother Innov-is F400 User Manual - Dutch - 112 pages

Brother Innov-is F400 User Manual - French - 112 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info