718740
12
Zoom out
Zoom in
Previous page
1/112
Next page
Names of Machine Parts and Their Functions
B-4
Operation panel and operation keys
1 LCD (liquid crystal display)
Settings for the selected stitch and error messages for
incorrect operations appear in the LCD.
For details, refer to “LCD” on page B-9
2 Stitch length keys
Press to adjust the stitch length in the LCD.
3 Automatic reverse/reinforcement key
Press to use the automatic reverse/reinforcement stitching
function.
4 Automatic thread cutting key
Press to select the automatic thread cutting function.
5 Initial needle position key
Press to select either “1 Straight stitch (Left)” or “3 Straight
stitch (Middle)” as the utility stitch that is automatically selected
when the machine is turned on.
6 Needle position key
Press to select the needle stop position (the needle position for
when the machine is not being operated) to be up or down.
7 Width control key
Press to allow the stitch width to be adjusted using the sewing
speed controller. For details, refer to “Satin stitching using the
sewing speed controller” in the “Sewing” section.
8 Twin needle key
Press to use the twin needle. For details, refer to “Using the
twin needle” on page B-21.
9 Stitch pattern keys
Use these keys to select the desired stitch.
0 Stitch width keys
Press to adjust the stitch width in the LCD.
Using the flat bed attachment
Pull the top of the flat bed attachment to open the accessory
compartment.
A presser foot accessory tray is stored in the accessory
compartment of the flat bed attachment.
1 Storage space of the flat bed attachment
2 Presser foot accessory tray
Note
The operation keys of this machine are
capacitive touch sensors. Operate the keys by
directly touching them with your finger.
The response of the keys varies according to the
user.
The pressure exerted on the keys does not affect
the response of the keys.
Since the operation keys react differently
depending on the user, adjust the setting for the
input sensitivity. (page B-10)
When using an electrostatic touch pen, make
sure that its point is 8 mm or more. Do not use a
touch pen with a thin point or a unique shape.
b
a
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother Innov-is F400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother Innov-is F400 in the language / languages: English as an attachment in your email.

The manual is 3,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother Innov-is F400

Brother Innov-is F400 User Manual - German - 112 pages

Brother Innov-is F400 User Manual - Dutch - 112 pages

Brother Innov-is F400 User Manual - French - 112 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info