718735
50
Zoom out
Zoom in
Previous page
1/72
Next page
Utility stitches
48
Free motion quilting
We recommend attaching the foot controller and sewing at a
consistent speed. You can adjust the sewing speed with the
speed control slide on the machine.
The quilting foot* is used for free motion quilting with
zigzag or decorative stitches or for free motion quilting of
straight lines on fabric with an uneven thickness.
* Items sold separately, please contact your authorized
Brother dealer.
a
Slide the feed dog position switch, located at the rear
of the machine on the base, to (to the left as seen
from the rear of the machine).
The feed dogs are lowered.
b
Select a stitch.
For details, refer to “Stitch Chart” on page 33.
*1 For the 16 stitches model, select stitch “02”, and use
the reinforcement stitch button. Do not use reverse
stitching and automatic reverse/reinforcement
stitching.
*2 For the 16 stitches model, select stitch “04”, and use
the reinforcement stitch button. Do not use reverse
stitching and automatic reverse/reinforcement
stitching.
c
Remove the presser foot holder.
For details, refer to “Removing and attaching the
presser foot holder” on page 22.
d
Attach the quilting foot by positioning the pin of the
quilting foot above the needle clamp screw and
aligning the lower-left of the quilting foot and the
presser bar.
e
Hold the quilting foot in place with your right hand,
and tighten the presser foot holder screw using the
screwdriver with your left hand.
f
Use both hands to stretch the fabric taut, and then
move the fabric at a consistent pace in order to sew
uniform stitches roughly 2.0 mm - 2.5 mm (approx.
1/16 inch - 3/32 inch) in length.
g
After sewing is finished, slide the feed dog position
switch lever to (to the right as seen from the rear
of the machine) and turn the handwheel to raise the
feed dogs.
CAUTION
With free motion quilting, control the feeding
speed of the fabric to match the sewing speed.
If the fabric is moved faster than the sewing
speed, the needle may break or other damage
may result.
Quilting foot
Stitch
No.
04 04 04
*1
18 16 16
*2
80
stitches
60
stitches
50
stitches
16
stitches
1 Pin
2 Needle clamp screw
3 Presser bar
Note
Make sure that the quilting foot is not slanted.
1 Presser foot holder
screw
CAUTION
Be sure to securely tighten the screws with the
included screwdriver. Otherwise, the needle
may touch the quilting foot, causing it to bend
or break.
1 Stitch
a
b
c
a
50


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother Innov-is A60 SE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother Innov-is A60 SE in the language / languages: English as an attachment in your email.

The manual is 27,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother Innov-is A60 SE

Brother Innov-is A60 SE User Manual - German - 72 pages

Brother Innov-is A60 SE User Manual - Dutch - 72 pages

Brother Innov-is A60 SE User Manual - French - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info