718735
48
Zoom out
Zoom in
Previous page
1/72
Next page
Utility stitches
46
d
Turn the handwheel toward you (counterclockwise),
and then begin sewing around the edge of the
appliqué, making sure that the needle drops just
outside of the appliqué.
When sewing around corners, stop the machine with
the needle in the fabric just outside of the appliqué,
raise the presser foot lever, and then turn the fabric as
needed to change the sewing direction.
Patchwork (crazy quilt) stitching
a
Fold the edge of the top piece of fabric and place it
over the lower piece.
b
Attach zigzag foot “J”.
c
Select a stitch.
The stitches shown below are examples. Select the
desired stitch.
For details, refer to “Stitch Chart” on page 33.
*1 For the 16 stitches model, select stitch “04”, and use
the reinforcement stitch button. Do not use reverse
stitching and automatic reverse/reinforcement
stitching.
d
Sew the two pieces of fabric together so the stitch
pattern spans over both pieces.
Use pins if necessary.
Piecing
Sewing together two pieces of fabric is called “piecing”. The
fabric pieces should be cut with a 6.5 mm (1/4 inch) seam
allowance.
Sew a piecing straight stitch 6.5 mm (1/4 inch) from either the
right side or the left side of the presser foot.
a
Baste or pin along the seam allowance of the fabric
that you wish to piece together.
b
Attach zigzag foot “J”.
c
Select a stitch.
For details, refer to “Stitch Chart” on page 33.
*1 For the 16 stitches model, select stitch “02”, and use
the reinforcement stitch button. Do not use reverse
stitching and automatic reverse/reinforcement
stitching.
d
Sew with the side of the presser foot aligned with the
edge of the fabric.
For a seam allowance on the right side
Align the edge of the fabric with the right side of the
presser foot, and set the stitch width 5.5 mm (7/32 inch)
and sew using stitch .
For a seam allowance on the left side
Align the left side of the presser foot with the edge of the
fabric, and set the stitch width 1.5 mm (1/16 inch) and
sew using stitch .
Stitch
No.
18 16 16
*1
27 25 24
28 26 25
29 27 26
CAUTION
Do not stitch over pins.
80
stitches
60
stitches
50
stitches
16
stitches
Stitch
No.
15 14 14
*1
1 6.5 mm (1/4 inch)
1 6.5 mm (1/4 inch)
Memo
To change the width of the seam allowance (needle
position), adjust the stitch width. For details, refer to
“Setting the stitch width” on page 27 and “Sewing an
even seam allowance” on page 29.
80
stitches
60
stitches
50
stitches
16
stitches
1
1
48


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother Innov-is A60 SE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother Innov-is A60 SE in the language / languages: English as an attachment in your email.

The manual is 27,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother Innov-is A60 SE

Brother Innov-is A60 SE User Manual - German - 72 pages

Brother Innov-is A60 SE User Manual - Dutch - 72 pages

Brother Innov-is A60 SE User Manual - French - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info