613627
39
Zoom out
Zoom in
Previous page
1/44
Next page
37
Troubleshooting
Several solutions for minor problems are described
below. If the problem persists, contact your nearest
authorized dealer.
The Thread was Accidentally Cut
Automatically and the Bobbin Thread is
Caught inside the Machine (Only for
Machines Equipped with the Automatic
Thread Cutting Function)
a
Cut the thread near the fabric above the
needle plate, and then remove the fabric.
a Thread
b
Remove the bobbin, and then hold it out
toward the left side of the machine.
c
Lower the presser foot.
d
Press the “Thread Cutter” button again, and
then pull the thread out to the left while the
thread cutter is operating.
The Pattern is Misaligned
Refer to “Adjusting the Thread Tension” and increase
the upper thread tension. If the pattern is still
misaligned, reduce the tension of the bobbin thread.
Example: Decorative Stitch
a Correct tension
b The upper thread tension is too loose, or the bobbin
thread tension is too tight.
The Bobbin Thread Catches on the Tension
Spring of the Bobbin Case
Sew with no tension applied to the bobbin thread.
(Refer to “When Tension is Not Applied to the Bobbin
Thread” on page 31.)
CAUTION
DO NOT adjust the position of the phillips (+)
screw on the bobbin case (gray) as this may result in
damage to the bobbin case, rendering it useless.
If the slotted screw (-) is difficult to turn, do not use
force. Turning the screw too much or providing
force in either (rotational) direction may cause
damage to the bobbin case. Should damage occur,
the bobbin case may not maintain proper tension.
Note
If the bobbin thread tension is tight, the thread
cannot be passed through the tension spring when
the bobbin is installed in the bobbin case. (Refer to
“When Tension is Not Applied to the Bobbin Thread”
on page 31.)
CAUTION
Do not pull on the thread with excessive force,
otherwise the machine may be damaged.
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother Innov-is 5000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother Innov-is 5000 in the language / languages: English as an attachment in your email.

The manual is 6,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother Innov-is 5000

Brother Innov-is 5000 Quick start guide - English - 64 pages

Brother Innov-is 5000 User Manual - English - 252 pages

Brother Innov-is 5000 Quick start guide - German - 64 pages

Brother Innov-is 5000 Additional guide - German - 44 pages

Brother Innov-is 5000 User Manual - German - 248 pages

Brother Innov-is 5000 Quick start guide - Dutch - 64 pages

Brother Innov-is 5000 Additional guide - Dutch - 44 pages

Brother Innov-is 5000 User Manual - Dutch - 248 pages

Brother Innov-is 5000 Quick start guide - French, Italian, Spanish - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info