613627
37
Zoom out
Zoom in
Previous page
1/44
Next page
35
q
Leaving about 10 cm (approx. 4 inches) of
thread at the ends, use scissors to cut the
threads.
a 10 cm (approx. 4 inches)
Finishing the Thread Ends
a
At the end of the stitching, pull the end of the
bobbin thread up to the wrong side of the
fabric.
a Wrong side of fabric
b Bobbin thread
b
From the wrong side of the fabric, tie the
bobbin thread and the upper thread together
by hand, and then cut off excess threads with
scissors.
a Wrong side of fabric
b Surface of fabric
c
If the desired results could not be achieved,
adjust the tension of the bobbin thread and of
the upper thread, and then try sewing the
stitching again.
For more details, refer to “Adjusting the Thread
Tension” on page 36.
Bobbin Work Free-Motion Sewing
If so desired, use a template or draw your design on the
stabilizer to allow for ease of stitching. Remember, your
stitches with your decorative thread will be on the
underneath side of your fabric and the stabilizer will be
on the top of the wrong side of your fabric.
a
Print the desired template.
Note
Do not sew reinforcement/reverse stitches or use a
“Thread Cutter” button (if so equipped) at the end of
the stitching; otherwise it will be difficult to pull the
bobbin thread up to the wrong side of the fabric. In
addition the threads may become tangled or the
needle may break possibly causing machine
damage.
Note
If it is difficult to pull up the bobbin thread, use a
ribbon embroidery needle to pull the thread up to the
wrong side of the fabric. Otherwise, use an awl to
pull up the bobbin thread.
Note
To ensure threads do not come undone after being
tied place a drop of fabric glue on knots.
Note
For bobbin work free motion sewing use the
instructions for “Creating Bobbin Work” beginning on
page 33.
Use the quilting foot provided with your machine. If
you do not have a quilting foot, contact your nearest
authorized dealer to purchase. For details on using
the quilting foot, refer to the Operation Manual
provided with your machine or with the presser foot.
Note
Print the template in its original dimensions. If an
enlarged template is used, the bobbin thread may
run out during sewing.
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother Innov-is 5000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother Innov-is 5000 in the language / languages: English as an attachment in your email.

The manual is 6,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother Innov-is 5000

Brother Innov-is 5000 Quick start guide - English - 64 pages

Brother Innov-is 5000 User Manual - English - 252 pages

Brother Innov-is 5000 Quick start guide - German - 64 pages

Brother Innov-is 5000 Additional guide - German - 44 pages

Brother Innov-is 5000 User Manual - German - 248 pages

Brother Innov-is 5000 Quick start guide - Dutch - 64 pages

Brother Innov-is 5000 Additional guide - Dutch - 44 pages

Brother Innov-is 5000 User Manual - Dutch - 248 pages

Brother Innov-is 5000 Quick start guide - French, Italian, Spanish - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info