1875
107
Zoom out
Zoom in
Previous page
1/143
Next page
TROUBLESHOOTING 6 - 2
Error messages in the status monitor
The Status Monitor will report problems with the printer. Take the corrective actions listed in the following
table for the error message that the Status Monitor reports.
The default setting for the Status Monitor is off. If you would like to turn the status monitor on, you can
change the setting of the Status Monitor in the Device Options of the Advanced tab. See Device
Options on page 2-6.
Error message
Action
Front Cover Open
Close the front cover of the printer.
Jam Clear Cover Open
Close the jam clear cover of the printer. See page 6-9.
Face up Open
(For HL-5150D / HL-5170DN)
Close the face-up (back) output tray of the printer.
Memory Full
Press the Go button to print the data remaining in the printer. Press the Job
Cancel button if you want to delete the data remaining in the printer.
Reduce the print resolution or reduce the complexity of your document.
Expand the printer memory by adding a commercially available DIMM
memory module. See Installing additional memory on page 4-2.
No Paper Tray1
No Paper Tray2
No Paper Manual Feed
No Paper Multi Purpose
Tray
The paper tray may be out of paper or not properly installed. If it is empty, put
a new stack of paper in the paper tray. For HL-5130, put paper in the paper
tray and then press the Go button.
If there is paper in the paper tray, make sure it is straight. If the paper is curled,
straighten it before printing. Sometimes it is helpful to remove the paper, turn
the stack over and put it back in the paper tray.
Reduce the amount of paper in the paper tray, and then try again.
Make sure you use paper that meets Brother’s recommended paper
specifications. See What kind of paper can I use? on page 1-5.
Jam Tray 1
Jam Tray 2
Jam Inside
Jam Rear
Jam Multi Purpose Tray
Jam Duplex
(For HL-5150D / HL-5170DN)
Take out the jammed paper from the indicated area.
See Paper jams and how to clear them on page 6-6.
Duplex Size Error
(For HL-5150D / HL-5170DN)
Press the Go button. Specify the printable paper size. The paper size you can
use for Duplex printing is A4, Letter or Legal.
No Duplex Tray
(For HL-5150D / HL-5170DN)
Install the Duplex tray into the printer.
Duplex Lever Error
(For HL-5150D / HL-5170DN)
Move the Duplex lever to the correct position.
107


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother HL-5150D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother HL-5150D in the language / languages: English as an attachment in your email.

The manual is 3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother HL-5150D

Brother HL-5150D User Manual - German - 137 pages

Brother HL-5150D User Manual - Dutch - 143 pages

Brother HL-5150D User Manual - French - 143 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info