579722
148
Zoom out
Zoom in
Previous page
1/199
Next page
Troubleshooting
143
6
No Drum Unit The drum unit is not installed
correctly.
Re-install the drum unit. (See Drum unit
on page 101.)
No Paper The machine is out of paper or
paper is not correctly loaded in the
paper tray.
Put the paper in the indicated paper tray. If the
problem is not resolved, the paper pick-up roller may
need to be cleaned. Clean the paper pick-up roller.
(See Cleaning the paper pick-up roller on page 131.)
No Toner The toner cartridge for the colour
indicated on the second line of LCD
is not installed correctly.
Pull out the drum unit. Take out the toner cartridge for
the colour indicated on the second line of LCD, and
then put it back into the drum unit. (See Toner
cartridges on page 96)
No Tray The paper tray that is indicated on
the second line of the LCD is not
installed or not installed correctly.
Re-install the paper tray that is indicated on the
second line of the LCD.
No Waste Toner The waste toner box is not installed
correctly.
Re-install the Waste Toner Box. (See Waste toner
box on page 110.)
Out of Memory The machine’s memory is full. If the LCD shows this error message when you print
the secure data, press Cancel and delete the
previously stored data.
Except in the case of printing secure data, add more
memory. (See Installing extra memory on page 87.)
Registration
<The second line of the
LCD>
Registration
failed. See
Troubleshooting
chapter in User's
Guide.
Registration failed. Turn off the machine. Wait a few seconds, then
turn it on again.
Put in a new belt unit. (See Replacing the belt unit
on page 106.)
If the problem continues, call your dealer or
Brother Customer Service.
Short Paper The length of the paper in the tray is
too short for the machine to deliver it
to the Face-down output tray.
Open the back cover (back output tray) to let the
printed paper out on the back output tray. Remove
the printed pages and then press Go.
Size Error The paper size defined in the printer
driver is not supported by the
defined tray.
Choose a paper size which is supported by each tray.
(See Type and size of paper on page 2.)
Size Error DX
(HL-4150CDN/
HL-4570CDW(T) only)
The paper size defined in the printer
driver is not usable for the automatic
duplex printing.
Press Cancel. Choose a paper size which is
supported by the duplex tray. (See Type and size of
paper on page 2.)
Size Mismatch The paper in the indicated tray is not
the correct size.
Put the same size paper in the paper tray that is
selected in the printer driver, and then press Go, or
select the size of paper you set in the indicated paper
tray.
Small Paper The paper size specified in the
printer driver is too small for the
machine to deliver it to the
Face-down output tray.
Open the back cover (back output tray) to let the
printed paper out on the back output tray and then
press Go.
Error messages (continued)
Error message Cause Action
148


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother HL-4570CDWT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother HL-4570CDWT in the language / languages: English as an attachment in your email.

The manual is 9,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother HL-4570CDWT

Brother HL-4570CDWT User Manual - German - 205 pages

Brother HL-4570CDWT User Manual - Dutch - 206 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info