579722
146
Zoom out
Zoom in
Previous page
1/199
Next page
Troubleshooting
141
6
LCD messages 6
If any problems occur, the machine automatically stops printing, diagnoses the problem, and displays the
resulting message on the LCD to alert you. Take the appropriate action, referring to the following tables. If
you cannot clear the problem, call the dealer you bought the machine from or Brother Customer Service.
Note
The LCD names for the paper trays are as follows.
Standard paper tray: Tray 1
Multi-purpose tray: MP
Optional lower tray unit: Tray 2
Error messages
Error message Cause Action
Access Error The device is removed from the
USB direct interface while the data
is processing.
The USB device was removed while data was
processing. Press Cancel. Reinsert the USB device
and try to print with Direct Print.
Calibrate
<The second line of the
LCD>
Calibration
failed. See
Troubleshooting
chapter in User's
Guide.
Calibration failed. Turn off the machine. Wait a few seconds, then
turn it on again.
Put in a new drum unit. (See Replacing the drum
unit on page 102.)
Put in a new belt unit. (See Replacing the belt unit
on page 106.)
Put in a waste toner box. (See Replacing the
waste toner box on page 110.)
If the problem continues, call your dealer or
Brother Customer Service.
Cartridge Error The toner cartridge is not installed
correctly.
Pull out the drum unit. Take out the toner cartridge
indicated on the LCD and then correctly re-install it in
the drum unit. Put the drum unit back in the machine.
If the problem continues, call your dealer or Brother
customer Service.
Condensation One of the issues that can cause
this error is that condensation may
form inside the machine after a
room temperature change.
Leave the machine turned on. Wait for 30 minutes
with the front cover fully opened. Then turn off the
machine and close the cover. Turn it on again.
Cover is Open The cover indicated on the LCD is
not completely closed.
Close the cover that is indicated on the second line of
the LCD.
146


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother HL-4570CDWT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother HL-4570CDWT in the language / languages: English as an attachment in your email.

The manual is 9,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother HL-4570CDWT

Brother HL-4570CDWT User Manual - German - 205 pages

Brother HL-4570CDWT User Manual - Dutch - 206 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info