718827
25
Zoom out
Zoom in
Previous page
1/72
Next page
23
1
d
Press the black button to release the presser
foot.
e
Place a different presser foot below the presser
foot holder so that the presser foot pin is aligned
with the shank in the holder.
Position the presser foot so the letter indicating
the presser foot type (J, A, etc.) is positioned to be
read.
Note
The presser foot to be used with each stitch
appears in the LCD. To select a stitch, refer to
“Selecting a stitch” (page 24).
f
Slowly lower the presser foot lever so that the
presser foot pin snaps into the shank.
a Presser foot lever
b Shank
c Pin
The presser foot is attached.
g
Raise the presser foot lever to check that the
presser foot is securely attached.
Remove the presser foot holder when cleaning the
sewing machine or when installing a presser foot that
does not use the presser foot holder, such as the
quilting foot. Use the disc-shaped screwdriver to
remove the presser foot holder.
a
Remove the presser foot. (Refer to page 22.)
b
Loosen the presser foot holder screw.
Attaching the presser foot holder
a
Align the presser foot holder with the lower-left
side of the presser bar.
b
Holding the presser foot holder in place, tighten
the screw.
Note
If the presser foot holder is not correctly installed,
the thread tension will be incorrect.
Removing the presser foot
holder
CAUTION
Be sure to securely tighten the presser foot
holder screw, otherwise the presser foot holder
may fall off and the needle may strike it, causing
the needle to bend or break.
a Disc-shaped
screwdriver
b Presser foot holder
c Presser foot holder
screw
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother FS60S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother FS60S in the language / languages: English as an attachment in your email.

The manual is 2,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother FS60S

Brother FS60S User Manual - German - 72 pages

Brother FS60S User Manual - Dutch - 72 pages

Brother FS60S User Manual - French - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info