718827
23
Zoom out
Zoom in
Previous page
1/72
Next page
21
1
You can sew with this needle and two top threads. You
can use the same color or two different colors of thread
for making decorative stitches.
a
Install the twin needle.
For details on installing a needle, refer to
“Replacing the needle” (page 20).
b
Thread the upper thread for the left needle.
For details, refer to steps
a through i of
“Upper threading” (page 15).
c
Manually thread the left needle with the upper
thread.
Pass the thread through the eye of the needle
from the front to the back.
d
Insert the extra spool pin onto the end of the
bobbin winder shaft.
e
Install the thread spool and thread the upper
thread.
Memo
When setting the thread spool, set it so that the
thread winds off from the front of the spool.
f
Thread the upper thread for the right needle in
the same way as the left needle.
g
Without passing the thread through the needle
bar thread guide, manually thread the right
needle.
Pass the thread through the eye of the needle
from the front to the back.
h
Attach zigzag foot “J”. (Refer to page 22.)
Note
Models equipped with a needle threader
You cannot use the needle threader to thread the
twin needle. Instead, thread the twin needle by
hand, from front to back. Using the needle
threader may damage the machine.
i
Turn on the sewing machine.
Sewing with the twin needle
a Twin needle b Extra spool pin
CAUTION
Use twin needles that have been made for this
machine (part code: 131096-121).
Do not sew with bent needles. The needle could
break and injure you.
You can not use the needle threader to thread
the twin needle. Instead, thread the twin needle
by hand, from front to back. Using the needle
threader may damage the machine.
When using the twin needle, be sure to select an
appropriate stitch, otherwise the needle may
break or the machine may be damaged.
Select a stitch width of 5.0 mm (3/16 inch) or
less, otherwise the needle may break or the
machine may be damaged.
a Bobbin winder shaft
b Extra spool pin
c Thread spool
CAUTION
When using the twin needle, be sure to attach
zigzag foot “J”, otherwise the needle may break
or the machine may be damaged.
a Needle bar thread guide
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother FS60S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother FS60S in the language / languages: English as an attachment in your email.

The manual is 2,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother FS60S

Brother FS60S User Manual - German - 72 pages

Brother FS60S User Manual - Dutch - 72 pages

Brother FS60S User Manual - French - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info