718893
30
Zoom out
Zoom in
Previous page
1/68
Next page
28
With free-arm sewing
1. Remove the bed extension.
1
1
Bed extension
2. Position the fabric, and start sewing.
(1) Raise the presser foot, insert the fabric as
shown in the illustration, lower the presser foot,
and then begin sewing.
(2) Finish sewing by overlapping about 4 cm
(1-1/2 inch) of the beginning and end of the
stitching.
Stabilizing the beginning and
end of stitching
To sew with the beginning and end of stitching
stabilized, finish the beginning and end of stitching
with a 4-cm-square piece of scrap fabric as
described below.
Beginning of stitching
1. Raise the presser foot, and then insert the
scrap fabric. Lower the presser foot, turn the
handwheel toward you a few times by hand,
and then lightly step on the foot controller to
start sewing.
2. When nearing the end of stitching for the scrap
fabric, stop the machine. Insert the fabric as
shown in the illustration below, and then lightly
step on the foot controller to start sewing.
a
b
1
Scrap fabric
2
Fabric
End of stitching
1. When nearing the end of stitching for the fabric,
stop sewing. Insert the scrap fabric as shown in
the illustration below, and then finish sewing.
2. Sew into the scrap fabric, stop the machine, and
then use scissors to cut the threads between
the fabrics and scrap fabrics.
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother CV-3440 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother CV-3440 in the language / languages: English, Spanish as an attachment in your email.

The manual is 15,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother CV-3440

Brother CV-3440 User Manual - German - 68 pages

Brother CV-3440 User Manual - Dutch, French - 68 pages

Brother CV-3440 User Manual - Italian - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info