718893
29
Zoom out
Zoom in
Previous page
1/68
Next page
27
English
Sewing a cover stitch
1. Determine how much of the fabric will be folded
up.
2. Fold up the fabric the desired amount, and then
iron it in place.
3. Use a ruler to measure, and then use a
fabric marker to mark the top of the fabric to
sew where the edge of the folded fabric is
positioned.
4. Place the bottom of the presser foot onto the
top of fabric, and then check that the drawn
mark is just barely to the right of the left needle.
5. Sew exactly on the mark.
6. After sewing is finished, refer to “Removing the
fabric from the machine (Cover stitch model)”
on page 24 for details on taking care of the
threads.
2
4
3
1
6
5
1
Fabric (surface)
2
Mark drawn with fabric marker
3
Left needle (just barely on the left side of the mark)
4
Right needle
5
Fabric
6
Needle
Sewing tubular garments
(for example, cuffs)
Without free-arm sewing
1. Raise the presser foot, insert the fabric as
shown in the illustration, lower the presser foot,
and then begin sewing.
2. Finish sewing by overlapping about 4 cm (1-1/2
inch) of the beginning and end of the stitching.
NOTE:
When sewing tubular garments, overlapping
the beginning and end of the stitching by about
4 cm (1-1/2 inch) will prevent the seam from
tearing.
3. Remove the fabric as explained in “Removing
the fabric from the machine (Cover stitch model)”
and “Removing the fabric from the machine (Top
cover stitch model)” on pages 24 and 25.
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother CV-3440 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother CV-3440 in the language / languages: English, Spanish as an attachment in your email.

The manual is 15,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother CV-3440

Brother CV-3440 User Manual - German - 68 pages

Brother CV-3440 User Manual - Dutch, French - 68 pages

Brother CV-3440 User Manual - Italian - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info