644488
171
Zoom out
Zoom in
Previous page
1/186
Next page
BE-1204B-BC • BE-1206B-BC 9-7
Chapter 9 Error code list
Code Error Messages Error Measures
E-D5
Needle bar case motor
overcurrent
Needle bar case motor overcurrent
Turn OFF the power. The possible causes for this
error are, troubles of the needle bar case motor,
troubles of the main PCB, and troubles of the
drive PCB.
E-D6 Jump motor overcurrent Jump motor overcurrent
Turn OFF the power. The possible causes for this
error are troubles of the jump motor and troubles
of the head PCB.
E-D7
Temperature rise error
Clean the fan filter
The temperature of the heat sink
on the drive PCB rose excessively
Turn OFF the power and check if the fan filter has
any clogging.
E-D8
Temperature sensor
abnormal
Temperature sensor abnormal
Turn OFF the power. The possible causes for this
error are troubles of the thermistor and troubles
of the drive PCB.
E-E1
X-axis pulse motor
overcurrent stop
Turn off the power
X-axis pulse motor overcurrent
stop
E-E2
Y-axis pulse motor
overcurrent stop
Turn off the power
Y-axis pulse motor overcurrent
stop
Turn OFF the power and ON once. If the same
error occurs again, the pulse motor or the drive
PCB is faulty.
E-E3 Exhaust fan motor stop Cooling fan motor stop A Press R.
Turn OFF the power and check the fan harness.
Turn OFF the power again. If the same error
occurs again, the fan or the power PCB is faultly.
E-E4 Hook motor error Lower shaft communication error This is not displayed in this model.
E-E5 ERROR E5
Over-run error during interfacing to
main PCB CPU
E-E6 ERROR E6
Framing error during interfacing to
main PCB CPU
E-E7 ERROR E7
Parity error during interfacing to
main PCB CPU
E-E8 ERROR E8
Receiving time up error during
interfacing to main PCB CPU
E-E9 ERROR E9
Send/Receive inconsistent error
during interfacing to main PCB
CPU
E-EA ERROR EA
ACK code receiving error during
interfacing to main PCB CPU
E-EB ERROR EB
Send/Receive ID code error during
interfacing to main PCB CPU
E-EC ERROR EC
Send data checksum error during
interfacing to main PCB CPU
E-ED ERROR ED
Data empty error during interfacing
to main PCB CPU
E-EE ERROR EE
Abnormal data received in the
inner-machine communication
E-EF ERROR EF Receiving error on interface
E-F1 ERROR F1 Receive time up error
E-F2 ERROR F2 Request-to-waiting time up error
E-F3 ERROR F3 Request-to-receive time up error
E-F4 ERROR F4 Receive command error
E-F5 ERROR F5 NACK code receiving error
E-F6 ERROR F6
Data requested for needle position
can not be returned.
E-F7 ERROR F7
It is not receive command for the
request one.
E-F8 ERROR F8 PRE code error
This is not usually displayed.
171


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother BE-1206B-BC Stand-Alone type at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother BE-1206B-BC Stand-Alone type in the language / languages: English as an attachment in your email.

The manual is 3,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info