718492
248
Zoom out
Zoom in
Previous page
1/283
Next page
Troubleshooting
233
10
The order of the output
document pages
changes.
The Output Tray has been positioned
so that it does not match the size of the
document.
Carefully position the Output Tray so that it
matches the size of the document.
The scan quality is
poor.
Paper dust has accumulated on the
surface of the pick-up roller or
reverse roller.
Paper dust has accumulated on the
surface of the glass strips inside the
machine.
The resolution is too low.
Clean the reverse roller and pick-up roller. To
clean the reverse roller, see Replace the
Reverse Roller on page 217 to learn how to pull
the reverse roller out from the machine, clean
the rubber side of the reverse roller with a soft,
lint-free cloth moistened with water, and then
install the reverse roller in the machine. To clean
the pick-up roller, see Clean the Scanner and
Rollers on page 205.
Clean the glass strips inside the machine. See
Clean the Scanner and Rollers on page 205.
Increase the scanner resolution.
The machine pauses
for about
three seconds
between each page
when scanning.
If you scan continuously, the internal
temperature of the machine may
increase, causing the machine to enter
the motor save mode.
NOTE
The length of the pause may vary
depending on the scanning
conditions.
This is normal and you may continue to scan.
Bleed-through is seen
in the scan data.
The settings are not appropriate for the
type of document being scanned.
Select the Remove Bleed-through / Pattern /
Remove Background Colour check box.
Colours in the
scanned data are
dark.
The settings are not appropriate for the
type of document being scanned.
Do one of the following:
Select the Remove Bleed-through / Pattern /
Remove Background Colour check box, and
then scan from your computer.
Increase brightness, and then scan from your
computer.
Increase contrast, and then scan from your
computer.
Change Scan Type to Grey or Colour, and then
scan from your computer.
A page that is not a
blank page is skipped.
The document is too light.
Skip Blank Page is set to On.
Set Skip Blank Page to Off.
Alternatively, use a lower Skip Blank Page
sensitivity setting.
Cannot scan a long
document.
Long Paper is not selected for the
document size.
Select Long Paper for the document size. If you
cannot select Long Paper, when scanning from the
machine’s Control Panel, set Skip Blank Page to off
and set Scan Type to an option other than Auto.
Then, you can select Long Paper for the document
size.
Difficulty Cause Suggestions
248


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother ADS-2400N at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother ADS-2400N in the language / languages: English as an attachment in your email.

The manual is 6,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother ADS-2400N

Brother ADS-2400N User Manual - German - 294 pages

Brother ADS-2400N User Manual - Dutch - 295 pages

Brother ADS-2400N User Manual - French - 292 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info