718490
155
Zoom out
Zoom in
Previous page
1/208
Next page
Home > Troubleshooting > If You Are Having Difficulty with Your Machine > Network Problems > Your
Brother Machine Cannot Scan over the Network
Your Brother Machine Cannot Scan over the Network
Related Models: ADS-2700W
Cause Action Interface
You did not select Accept
in the security alert dialog
box during the Brother
Device installation,
applications’ start-up
process, or when using
the scanning features.
If you did not select Accept in the security alert dialog box, the firewall
function of your security software may be denying access. Some
security software may block access without showing a security alert
dialog box.
To allow access, see your security software instructions or ask the
manufacturer.
Wired/Wireless
Your security software
blocks your machine's
access to the network.
(The Network scanning
feature does not work. )
Windows
Configure the third-party Security/Firewall Software to allow
Network scanning. To add port 52515-52614 for Network scanning,
enter the information below:
- Name
Type any description, for example Brother NetScan.
- Port number
Type 54925.
- Protocol
Both TCP and UDP are selected.
See the instruction manual that came with your third-party
Security/Firewall Software or contact the software manufacturer.
Mac
Reinstall the driver.
Wired/Wireless
Your security software
blocks your machine's
access to the network.
The following port numbers are used for Brother network features:
Network scanning, Remote Setup
Port number 5566/Protocol TCP
Network scanning (Brother iPrint&Scan)
Port number 54921/Protocol TCP
BRAdmin Light
Port number 161/Protocol UDP
For information about how to open the port, see the security software
instructions or ask the manufacturer.
Wired/Wireless
Your Brother machine was
not assigned an available
IP address.
Confirm the IP address and the Subnet Mask.
Verify that both the IP addresses and Subnet Masks of your computer
and the Brother machine are correct and located on the same
network.
For more information about how to verify the IP address and the
Subnet Mask, ask your network administrator.
Wired/Wireless
You cannot connect the
Brother machine to the
network using wireless
capabilities.
Press Settings > Network > WLAN > WLAN Status >
Status. If the LCD displays Connection Failed:, ask your
network administrator whether your IP address is valid or not.
Wireless
Because the machine
does not support SMB 2.0,
Kerberos authentication,
or DFS, Network scanning
cannot be used.
Change the server settings or change the destination folder where
your document will be stored in the Scan to Network Profile from Web
Based Management.
Wired/Wireless
151
155


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother ADS-2200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother ADS-2200 in the language / languages: English as an attachment in your email.

The manual is 5,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother ADS-2200

Brother ADS-2200 User Manual - German - 213 pages

Brother ADS-2200 User Manual - Dutch - 213 pages

Brother ADS-2200 User Manual - French - 213 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info