525939
18
Zoom out
Zoom in
Previous page
1/68
Next page
11
TABLE OF
CONTENTS
Chapter
1
Chapter
2
Chapter
3
Chapter
4
Chapter
5
Chapter
6
Chapter
7
Chapter
8
Chapter
9
Chapter
10
Chapter
11
Chapter
12
Chapter
13
Chapter
14
Chapter
15
Chapter
16
Chapter
17
Chapter
18
Instructions for the
Differential Feed
Mechanism (Models
with Differential Feed)
This serger is equipped with two sets of feed dogs
under the presser foot to move the fabric through the
machine. The differential feed controls the move-
ment of both the front and the rear feed dogs. When
set at 1, the feed dogs are moving at the same speed
(ratio of 1). When the differential feed ratio is set at
less than 1, the front feed dogs move slower than the
rear feed dogs, stretching the fabric as it is sewn.
This is effective on lightweight fabric that may pucker.
When the differential feed ratio is set at greater than
1, the front feed dogs move faster than the back feed
dogs, gathering the fabric as it is sewn. This function
assists in removing the rippling when serging stretch
fabrics.
To adjust the differential feed.
(1)Locate the differential feed adjustment lever on
the left side of the machine.
(2)The normal setting is 1.0 on the differential feed
adjustment lever.
(3)To set less than 1.0, move the lever back.
(4)To set greater than 1.0, move the lever forward.
Instrucciones para el
mecanismo de alimenta-
ción con diferencial
(Modelos con alimenta-
dor diferencial)
Esta máquina de coser está provista de dos series
de alimentadores debajo del prensatelas para guiar
el tejido por la máquina. El alimentador con diferen-
cial controla los movimientos de los alimentadores
delanteros y traseros. Al ajustarlo en 1, los
alimentadores se desplazarán a una velocidad idén-
tica (relación de 1). Al ajustar la relación del alimen-
tador con diferencial en menos de 1, los alimentadores
delanteros van a moverse más despacio que los
traseros, estirando el tejido a medida que se cuese.
Esta operación resulta muy eficiente al coser mate-
riales finos que pueden arrugarse.
Cuando el alimentador con diferencial esté ajustado
en un valor superior a 1, los alimentadores delante-
ros van a moverse más rápido que los alimentadores
traseros, juntando el tejido al coserlo. Esta función
permite quitar las arrugas al coser tejidos que se
estiran.
Para ajustar el alimentador diferencial.
(1)Busque la palanca de ajuste del alimentador
diferencial en al lado izquierdo de la máquina.
(2)El ajuste normal es de 1,0 en la palanca de ajuste
del alimentador diferencial.
(3)Para ajustar menos de 1,0, mueva la palanca
hacia atrás.
(4)Para ajustar más de 1,0, mueva la palanca hacia
adelante.
1.0
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother 1134DW at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother 1134DW in the language / languages: English, Spanish as an attachment in your email.

The manual is 2,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info