780273
18
Zoom out
Zoom in
Previous page
1/26
Next page
18
4.2.4) USB port
The Comfort control unit has a Micro USB AB
plug. The USB plug is located in the tip of the de-
vice above the handlebar and is protected against
dirt and moisture by a rubber cap. A connected
USB device is supplied with max. 1 A charging
current.
Abb. 13 USB-Port
NOTE!
No liability is accepted for damage to the
mobile phone caused by the connection
to the Comfort control unit.
Connecting the USB Device
1. Open the rubber protection cap of the
USB port
2. Connect the USB device to the USB
port - direct connection or with a suitable
USB cable. A so-called OTG USB cable
must be used to charge a device. The
direction of connection must be observed.
The new connection is displayed on the
connected device.
Removing the USB device
1. Disconnect the USB device or the con-
necting cable from the USB port on the
Comfort control unit.
2. Close the USB port with the rubber cap.
NOTE!
Please observe the instructions for di-
sconnecting the USB connection in the
operating manual of the connected
device.
The Comfort control unit is only protected against
water and dirt when the rubber protection is
closed.
To prevent damage to the USB port of the control
unit, it is recommended that the USB cable is
also securely attached to the handlebars.
5) Error Codes
The Comfort control unit displays error codes for
the entire pedelec system. The error codes repre-
sent errors detected by the system. The following
table shows the meaning of the error codes. Plea-
se observe the recommended reaction to the error
codes.
WARNING!
Note the error codes!
Error codes can indicate serious errors in the
pedelec system. These errors prevent safe opera-
tion of the pedelec. Accidents with personal injury
and damage to the pedelec may occur.
Stop using the pedelec. Inform yourself about
the meaning of the error code and observe the
solution approach.
If the meaning of the error code is unclear, stop
the drive and turn off the wheel. Contact the
manufacturer, the dealer or your garage for
information on the next steps
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brose Bristol E-Touring at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brose Bristol E-Touring in the language / languages: English as an attachment in your email.

The manual is 0.93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info