606724
26
Zoom out
Zoom in
Previous page
1/48
Next page
Page 26
Advanced Operation
PTZ Setup
Pan/Tilt/Zoom (PTZ) Setup Continued:
In the PTZ SETUP screen you can set or control the following for each PRESET defined:
1. SET PRESET: Saves any PRESET functions changed with this screen.
2. CLEAN PRESET: Clears a defined PRESET without going to the SET CRUISE screen.
3. CALL PRESET: Calls a defined PRESET without going to the SET CRUISE screen.
4. AUTO SCAN: Enables AUTO SCAN feature without going through Quick Access Menu.
5. STOP SCAN: Enables AUTO SCAN feature without going through Quick Access Menu.
6. CRUISE SETUP: Configures the Cruise Setting. See next step for details.
Step 4: Configure the CRUISE SETUP of your PTZ Camera.
This feature allows you to set up a series of Pan, Tilt and Hold camera sequences and then
execute those operations in a continuous loop. This is useful when you want to record or
view the same set of pre-determined areas. You can customize these settings for each PTZ
camera connected to your DVR.
Understanding the CRUISE SETTING Options:
To access this menu In Live View, double click on the Channel with the connected PTZ
Camera to open to full screen view. From the Quick Access Menu select PTZ. Click SETUP
from the PTZ CONTROL screen and you will see the PTZ SETUP Menu. Click CRUISE SETUP
to configure the cruise settings for your PTZ Camera.
1. TOTAL: The total number of PRESET’s defined
2. PRESET: A defined pan, tilt and hold sequence. You can enter up to 128 PRESET’s for a
channel depending on how many areas you want to view or record.
3. STOP TIME: The total time in seconds for the camera to move through its defined
operation. Note: This includes travel time from the previous set point completion plus the length of time you want the camera
to hold on a position. For example, if the STOP TIME is set to 10 seconds and the travel time from the previous set point is
6 seconds, then the camera will hold on the position for only 4 seconds. It can take some trial and error to get the timing you
want. To help fine tune your timing after a set point is defined, selecting CALL will travel through the cruise setting for the
PRESET allowing you to adjust your timing.
4. SET: Stores the PRESET in memory
5. CLEAR: Removes the defined pan, tilt and hold sequence for a CRUISE SETUP. PRESETS will still be unchanged.
6. SAVE: Saves all PRESETS defined.
How to define a Cruise Setting PRESET
1. With your PTZ Channel selected and the CRUISE SETUP menu open as explained in the previous sections, be sure TOTAL is
0 and you are on PRESET 001. If not click CLEAR to reset the PRESET’s.
2. Using the Arrow Keys adjust the camera to the first position you want to monitor.
3. Set the STOP TIME setting using the Virtual Keypad. (See STOP TIME explanation above for important information)
4. Click SET to save. The TOTAL and PRESET numbers move to the next number.
5. Repeat steps 2 through 4 for each PRESET you want to define.
6. Click SAVE to save all PRESETS for this CRUISE SETTING.
7. Follow the same steps above to configure other PTZ cameras on other Channels.
8. Click EXIT several times to get to the Live View screen
9. Use the Quick Access Menu to select START CRUISE and STOP CRUISE to begin or end Cruise operation for all defined PTZ
channels.
PTZ Control
PTZ Setup
PTZ Cruise Setup
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BRK PRO-D1610 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BRK PRO-D1610 in the language / languages: English as an attachment in your email.

The manual is 5,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info