606753
25
Zoom out
Zoom in
Previous page
1/104
Next page
Page 25
PTZ Controls
Configuring PTZ Settings
PTZ is an acronym for pan, tilt, zoom. PTZ cameras that allow
the camera to pan left and right, tilt up and down, and zoom
in and out. To set the parameters of a PTZ camera, enter the
PTZ Settings interface: Menu > Camera > PTZ.
1. Choose camera from Camera dropdown list.
2. Enter parameters (should match PTZ camera parameters).
3. Click Apply.
Before you start
Make sure the PTZ and NVR are properly connected through the RS-485 interface.
Customizing Presets
Set a preset location for a PTZ camera to point to when an
event takes place: Menu > Camera > PTZ > More Settings.
1. Use directional button to wheel camera to desired location.
2. Click Save Preset.
3. Choose present number.
4. Repeat to save more presets. If number of presets is more
than 17, click [...] and choose available numbers.
Setting PTZ Presets, Patrols, and Controls
Channel-Zero Encoding
In order to decrease bandwidth without affecting the image quality, channel-zero encoding is supported to get a remote view of
many channels in real time from web browser of CMS software. Enter Live View Settings interface: Menu > Configuration > Live
View> Channel-Zero Encoding.
1. Enable Channel-Zero Encoding.
2. Configure Frame Rate, Max. Bitrate Mode, and Max. Bitrate.
After you set the Channel-Zero encoding, you can get a view in
the remote client or web brower of 16 channels in one screen.
User Logout
After logging out, the monitor turns to live view mode. After logging out of the system,
menu operation on screen is invalid. It is required to input a username and password.
1. Enter Shutdown Menu: Menu > Shutdown.
2. Click Logout.
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BRK NVR1640 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BRK NVR1640 in the language / languages: English as an attachment in your email.

The manual is 10,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info