606753
23
Zoom out
Zoom in
Previous page
1/104
Next page
Page 23
LIVE VIEW
Choosing Live View Functions
The Live View functions described on the previous page can be set using either the front panel, the USB mouse, or an auxiliary
monitor. Only certain features are available with each type of operation. The following table describes the functions available for
each.
Function Front panel operation
mouSe operation
(rigHt-click menu)
auxiliary monitor
Single Screen
Press corresponding alphanumeric
button (e.g. “2” to display screen for
channel 2 only)
Choose channel number from
dropdown list
Select camera from dropdown list
and switch to full-screen display
of that camera
Multi-Screen Press PREV/FOCUS button
Choose screen layout from
dropdown list
Choose screen layout from
dropdown list
Previous/Next Screen
Use right/down buttons to move to
next screen and left/up buttons to
move to previous screen
Click on Previous Screen or Next
Screen
Click Next Screen to switch to the
next set of displays when viewing
less than the maximum number
of cameras in Live View
Auto-Switch Press ENTER
Click Start Auto-Switch to enable
Click Stop Auto-Switch to disable
Playback Press PLAY Click Playback Enter Playback mode
Main/Aux Output Switch
Press MAIN/AUX button to switch
between main and auxiliary output
Click Aux Monitor to disable main
output
Menu Right click to enter main menu
Start Recording
Click Start Recording to start
continuous or motion-detection
recording of all channels
Add IP Camera Click Add IP Camera
Output Mode
Click Output Mode to choose
Standard, Bright, Gentle, or Vivid
Aux Monitor Click Aux Monitor
Main Monitor Enter Main operation mode
PTZ Enter PTZ Control mode
NOTE
:
The dwell time of the Live View
configuration must be set before
using the Start Auto-Switch.
The mouse will not work if in Aux
monitor mode and aux monitor is
not connected.
While Aux output mode is enabled
in the main output monitor, the
menu operation is not available.
In Live View on the main output
monitor, the menu operation is
not available while Aux output
mode is enabled.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BRK NVR1640 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BRK NVR1640 in the language / languages: English as an attachment in your email.

The manual is 10,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info