606747
65
Zoom out
Zoom in
Previous page
1/99
Next page
Page 65
Configuring RTSP
The Real Time Streaming Protocol (RTSP) controls
streaming media servers. To configure, enter the
Network Settings interface: Menu > Configuration >
Network > More Settings.
1. Enter the RTSP port in the RTSP Service Port field
(the default RTSP port is 554).
2. Click Apply.
NETWORK SETTING
Configuring Remote Alarm Host
With a remote alarm host configured, the DVR will send
the alarm event or exception message to the host when an
alarm is triggered. The remote alarm host must have the
Network Video Surveillance software installed.
To configure, enter the Network Settings interface: Menu >
Configuration > Network > More Settings.
1, Enter Alarm Host IP and Alarm Host Port.
2. Click Apply.
The Alarm Host IP refers to the IP address of the
remote PC on which the CMS (Client Management
System) software (e.g., Smartbridge High Definition) is
installed.
Alarm Host Port must be the same as the alarm
monitoring port configured in the software (default port is
7200).
Configuring Multicast
The multicast can be configured to realize live view for
more than 128 cameras through network.
A multicast address spans the Class-D IP range of
224.0.0.0 to 239.255.255.255. It is recommended to use the
IP address ranging from 239.252.0.0 to 239.255.255.255.
1. Enter the Network Settings interface.
Menu > Configuration > Network
2. Select the More Settings tab to enter the More Settings
interface.
3. Set Multicast IP. When adding a device to the CMS
(Client Management System) software, the multicast
address must be the same as the DVR’s multicast IP.
4. Click Apply
65


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BRK DVRAHD-1620 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BRK DVRAHD-1620 in the language / languages: English as an attachment in your email.

The manual is 7,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info