606747
63
Zoom out
Zoom in
Previous page
1/99
Next page
Page 63
Configuring NTP Server
A Network Time Protocol (NTP) Server can be configured on your DVR to ensure the
accuracy of system date/time.
To configure, enter the Network Settings interface:
Menu > Configuration > Network > NTP.
1. Select the NTP tab to enter the NTP Settings interface
2. Check the Enable NTP checkbox to enable this feature.
3. Configure the following NTP settings:
Interval: Time interval between the two synchronizing actions with NTP
server. The unit is minute.
NTP Server: IP address of NTP server.
NTP Port: Port of NTP server.
4. Click Apply to save and exit the interface.
The time synchronization interval can be set from 1 to 10080 minutes, and the
default value is 60 minutes. If the DVR is connected to a public network, you
should use a NTP server that has a time synchronization function, such as the
server at the National Time Center (IP Address: 210.72.145.44). If the DVR is set in
a more customized network, NTP software can be used to establish a NTP server
used for time synchronization.
NETWORK SETTINGS
NOTE
:
Configuring SNMP
Before you start
Download the SNMP software and manage to receive device information via SNMP
port before configuring the SNMP. By setting the Trap Address, the DVR is allowed to
send the alarm event and exception message to the surveillance center.
Access the SNMP to get device status and parameter-
related information by entering the Network Settings
interface: Menu > Configuration > Network > SNMP.
1. Check Enable SNMP.
2. Configure:
Trap Address: IP Address of SNMP host.
Trap Port: Port of SNMP host
3. Click Apply.
63


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BRK DVRAHD-1620 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BRK DVRAHD-1620 in the language / languages: English as an attachment in your email.

The manual is 7,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info