531013
41
Zoom out
Zoom in
Previous page
1/72
Next page
LOW setting- Use this setting when cooking very lean cuts such as fish.
These temperatures vary with outside temperature and the amount of wind.
Roasting
For best results when roasting, the burner should only be used on the low to medium setting. Use of the high
setting with the hood down may result in burnt food, damage to the non stick coating or both.
Remove the flat hot plate to help with heat circulation. Preheat the barbecue for a few minutes. Place a
roasting rack or aluminum foil dish onto the ribbed hot plate and place the meal to be roasted onto the rack or
into the dish and close the hood.
Adjust the control knob to maintain the temperature around the medium mark (approx. 200° to 230°)
Approximate cooking time with control set to medium temperature
Barbecue Roasts Minutes
Chicken & Rare Beef 45 mins per kg
Beef & Medium Lamb
(approx.)
55 mins per kg
Pork & Well Done
Beef/Lamb (approx.)
65 mins per kg
Care & Maintenance
Care & Maintenance
As with all appliances, proper care and maintenance will keep them in top operating condition and prolong their
life. Your new gas barbecue is no exception. By following these cleaning procedures on a timely basis, your
barbecue will be kept clean and working properly with minimum effort.
Spiders and small insects occasionally spin webs or make nests in the burner tubes during warehousing and
transit. These webs can lead to a gas flow obstruction which could result I a fire in and around the burner
tubes.
This type of fire is known as FLASH-BACK and can cause serious damage to your barbecue and create an
unsafe operating condition for the user. Although an obstructed burner tube is not the only cause of
FLASH-BACK it is the most common cause and frequent inspection and cleaning of the burner tubes is
necessary.
Flash-Back
If fire occurs in and around the burner, immediately turn off gas at its source and turn the burner control to OFF,
wait until the barbecue has cooled, then clean the burner tubes and burner ports as described in lighting and
operating procedure.
Cleaning the Grill Plates
After cooking, turn burner control to OFF and let barbecue cool before attempting to clean your grill plates.
The hood must be in the open position for
lighting.
Do not smoke at any time when attempting to
ignite the barbecue burners.
Caution: Do not move the stand while the
barbecue is in operation.
Do not leave the barbecue unattended when
alight.
Beware of spiders and wasps. Burner tube
should be inspected and cleaned periodically.
41


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brixton BQ-6333 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brixton BQ-6333 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 3,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info