Manual Brixton BQ-6333 (page 39 of 72) (English, German, Dutch, French, Spanish)

531013

Zoom out

Zoom in

1/72

Familiarise yourself with the general information and safety guidelines located at the front of this manual.

Check:

 Gas cylinder is filled

 The end of the burner inlet tube is properly located over the valve orifice

 The burner control is in ‘OFF’ position

 Ensure cylinder valve in its full off position.

 Check cylinder valve features to ensure it has proper mating threads to those of the regulator.

 Ensure burner control is in the ‘OFF’ position.

 Inspect valve connections port and regulator assembly. Look for any damage or debris. Remove

any debris. Inspect hose for damage. Never attempt to use damaged or blocked equipment.

 When connecting regulator assembly to the cylinder valve and the barbecue, tighten nut to a positive

stop by hand or spanner depending on the type of fitting.

 Open cylinder valve fully. Use a soapy water solution to check all connections for leaks before

attempting to light barbecue, If a leak is found, turn cylinder valve off and do not use barbecue until

repairs can be made by a local LP gas dealer.

 CAUTION: When the appliance is not in use, the gas must be turned of at the supply cylinder.

Disconnecting

 Ensure the burner control is

n the ‘OFF’ position.

 Ensure gas cylinder valve is

in its full off position.

 Detach the regulator

assembly from gas cylinder valve.

Lighting Procedure

Burner Operation & Ignition System check

o With cylinder valve in OFF position push and turn the control knob anti-clockwise until the control

clicks.

o Repeat action and check for sparking at the burner.

o If spark is not evident at the burner ignition point, check that the ignition lead is firmly attached to the

control and sparker tip.

o With sparking established turn the control knob to the OFF position, then turn on the cylinder valve.

Now push and turn control knob anti-clockwise ensuring that the control clicks and there is a spark at

the burner.

o Upon first assembly the gas line and burner will be full of air. In order for the burner to light properly

the lines must fill with gas. It may require several attempts at lighting the burner before you are

successful.

o If the burner fails to light after several attempts turn off gas supply at cylinder and inspect for

obstructions to gas flow.

Note: If for some reason, ignitor fails to produce

a spark at the electrode, barbecue can be lit by a

match. Insert match into match holder which is

suspended by a chain at front of barbecue. With

hood open insert lighted match into hole

in front

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Brixton BQ-6333 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 3,71 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Brixton BQ-6333 Manual

Product: