531004

Brixton BQ-6300 Manual

9
Zoom out
Zoom in
Previous page
1/26
Next page
V 10.01 8
• Use only regulators and hose approved for gas at the above pressures. The life expectancy of
the regulator is estimated as 10 years. It is recommended that the regulator is changed within
10 years of the date of manufacture.
• The use of the wrong regulator or hose is unsafe; always check that you have the correct items
before operating the barbecue
• For the connection of this gas barbecue you need an approved gas hose with a recommended
length of 80cm. It should be replaced if it appears to be damaged or cracked. You need to
check on this frequently. The maximum length of the gas hose is150cm.
• The gas hose should be connected in such a way that it can’t be twisted.
• You are obliged to replace the gas hose if national circumstances require.
• Always close the gas cylinder valve whenever the gas barbecue is not in use.
GAS CYLINDER
• The gas cylinder should not be dropped or handled roughly! If the appliance is not in use, the
cylinder must be disconnected. Replace the protective cap on the cylinder after disconnecting
the cylinder from the appliance.
• Cylinders must be stored outdoors in an upright position and out of the reach of children. The
cylinder must never be stored where temperatures can reach over 50°C. Do not store the
cylinder near flames, pilot lights or other sources of ignition.
CHANGING THE GAS CYLINDER
Precautions need to be taken when changing gas cylinder, which shall be carried out away from any
source of ignition.
• Gas cylinders must be replaced in a flame free environment.
• Do not smoke while changing the gas cylinder.
• Turn off the gas cylinder valve or regulator fully (clockwise) and take the empty cylinder of.
• Do not attempt to remove the regulator while the gas barbecue is still running.
• Make sure that the gas barbecue is extinguished completely.
• Remove the regulator from the empty cylinder.
IMPORTANT TEST FOR LEAKAGE
• Make 2-3 fluid ounces of leak detecting solution by mixing one part washing up liquid with 3
parts water.
• Ensure the control valve is “OFF”.
• Connect the regulator to the cylinder and ON/OFF valve to the burner, ensure the connections
are secure then turn ON the gas.
• Brush the soapy solution on to the hose and all joints. If bubbles appear you have a leak, which
must be rectified before use.
• Retest after fixing the fault.
• Turn OFF the gas at the cylinder after testing.
If leakage is detected and cannot be rectified. Do not attempt to cure leakage but consult your gas
dealer.
OPERATION:
• Connect gas pressure regulator and hose to the gas bottle.
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brixton BQ-6300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brixton BQ-6300 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 1,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info