536075

Britax-Romer MULTI-TECH II Manual

12
Zoom out
Zoom in
Previous page
1/115
Next page
4. Installation of your child seat (positioned backward) in a front
seat
Open both buckles. Pull the lap and
diagonal harness out suffi ciently (
approx.
600-900 mm
). Put the belt through the
belt buckle guide on the opposite side of
the buckle and into the belt tunnel
(Fig.
4b)
. There are two access slots in the seat
cover in order to simplify the insertion of the
belt through the belt tunnel and under the
seat cover
(Insert in Fig. 4b).
IMPORTANT – The child seat MUST always be used with a lap belt and
diagonal belt (approved according to UN/ECE Directive No. 16 or relevant
standards).
IMPORTANT – Do not use any carrying points other than those described in
these operating instructions and those labelled in the child restraint equipment.
NEVER install a child seat backwards on a vehicle seat that is equipped with an
airbag.
Slide the front seat back in order to create space for the child seat, but only so
far that the passenger sitting behind it can still sit comfortably.
Place the child seat with the support leg in the shortest position backwards on the
vehicle seat, so that the rocking base is lying against the back of the car seat.
(Fig.
4a)
.
4a
4c
Pull the loose seatbelt through the child seat, in order to ensure that the
seatbelt is not twisted. When the belt is tight, close the buckle on the side
of the belt buckle and ensure that the lap belt and diagonal belt are secured
(Insert in Fig. 4d).
Close the belt buckle on the other side and ensure that only the lap belt is
secured (Fig. 4d).
Ensure that both belt buckles have locked in.
If the belt buckle is no in the position that is market with a as incorrect and
the seat cannot be correctly fastened
(Fig. 4e), try it on a different seat in the
car.
4e
4b
4d
IMPORTANT – NEVER rest the child seat
on the dashboard or on the wind screen.
Push the belt through the belt tunnel, attach it on the other side and put the
tongue into the buckle
(Fig. 4c).
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Britax-Romer MULTI-TECH II at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Britax-Romer MULTI-TECH II in the language / languages: English, German, Danish, French, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 5,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info