Manual Britax-Romer MULTI-TECH II (page 11 of 115) (English, German, Danish, French, Swedish, Norwegian, Finnish)

536075

Zoom out

Zoom in

1/115

9-25kg

Place the fastening belt around the driver

seat, as well as the passenger seat, as

shown in (Fig. 3f).

If your car has an eyelet in the glide rail

of the set, this can alternatively be used

(Insert in Fig. 3g).

IMPORTANT – Do not install the

anchoring belts with luggage straps.

Loop the end of the loops of the fastening belts around the seat in front and

back again, as illustrated

(Fig. 3h). Put the ends of the fastening belt

toward the outside of the car seat and guide these through the loops

When the support leg brackets are pointing to the front and the belts are not

twisted, lock the buckle of the fastening belt into the tongues on the sides

of the child seat

. Tighten the fastening belts by pulling the loose ends

downwards evenly

Pull the support leg as far away from the back of the child seat as possible

(Fig. 3i). Lower the support leg as far as the ﬂ oor, maintaining the correct

angle

. Move the support leg and ensure that the support leg is secured.

Finally, ensure that the fastening belts are fully tightened, by pulling down

on the loose ends

(Fig. 3j). The support leg must be resting on solid ground

at an angle of 100° to the horizontal. It must not rest on the ﬂ aps of storage

compartments or similar

(Fig. 3j). Use the angle measurer on the last page

of these operating instructions, in order to check the angle of the support leg

against the ﬂ oor

Check whether the child seat is ﬁ rmly installed by moving it back and forth,as

well as sideways. If it is loose or if the support leg is not at an angle of 100° to

the ﬂ oor, you will need to reinstall it, so that it is secured at the correct angle.

Put your child into the seat according to

Fig. 5f.

100°

80°

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Britax-Romer MULTI-TECH II in the language / languages: English, German, Danish, French, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 5,31 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Britax-Romer MULTI-TECH II Manual

Product: