504579

Brita PURITY 600 Quell ST Manual

29
Zoom out
Zoom in
Previous page
1/146
Next page
29
Resetting the display unit
To operate the display unit it has to be removed from the connecting fi ttings. Slide the display hous-
ing up approx. 10 mm and pull off the display unit to the front. The display unit is operated using a
button on the back of the display unit.
If this button is pressed (> 10 seconds), the data •
set on initial installation will be accepted again, and
the capacity, by-pass setting and input date are all
updated.
> 10 sec
Note: If no input is made within 30 seconds, the display will return to operating mode without
accepting amended parameters.
Insert display unit from front at a height of approx. 10 mm and slide down. The loops on the display
part must be inserted in the grooves on the measuring head.
6.1 Removing the Filter Cartridge
Switch off the power supply of the terminal equipment (remove plug).•
Close inlet valve •
7
at inlet hose.
Remove pressure from the system by opening fl ush valve •
9
.
Note: Insert the free end of the fl ush hose in a bucket. If the escaping water is more than
0.5 litres, the inlet valve is not completely closed or is blocked with scale.
Close fl ush valve •
9
.
Stand on the kick loops •
12
.
Open the pressure vessel lid by pressing the lock •
15
and turning it anticlock-
wise as far as it will go. The fi lter cartridge is released by pressing on the
mantle handles.
Place the pressure vessel lid •
3
vertically on the lid handle
20
.
Turn the pressure vessel on the mantle handles anticlockwise as far as it will go.•
Note: Remain standing on the kick loops
12
with both feet.
Take your feet off the kick loops and press the pressure vessel down with both hands on the •
mantle handles
16
.
Remove exhausted fi lter cartridge •
2
from the pressure vessel
3
.
Place the exhausted fi lter cartridge •
2
in the sink with the connection facing down to drain the
remaining water (> 5 min.).
Place the transport protection cap •
18
of the new fi lter cartridge on the exhausted fi lter cartridge
and send it back in the original packaging.
… 29 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brita PURITY 600 Quell ST at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brita PURITY 600 Quell ST in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 5,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info