504579
27
Zoom out
Zoom in
Previous page
1/146
Next page
27
Parameter input monthly limit
Press button 2 x (< 1 second) to access the next
parameter input monthly limit. Monthly limit fl ashes.
Press the button (> 2 seconds) until the value for
the monthly limit rises and keep it pressed until the
desired value has been reached.
> 2 sec
Press button 2 x (< 1 second) to access the next
parameter input type of hardness. Type of hardness
ashes.
> 2 sec
Press button (> 2 seconds) until the desired type of
hardness has been selected.
Press button 3 x (< 1 second) until the message
“Reset“ appears and fl ashes in the display.
> 2 sec
Press button 1 x (> 2 seconds) until the total capacity
and the current date appear.
Note: If no input is made within 30 seconds, the display will return to operating mode without
accepting amended parameters.
Insert display unit from front at a height of approx. 10 mm and slide down. The loops on the
display part must be inserted in the grooves on the measuring head.
5.3 By-Pass Setting
Determining the by-pass setting
The by-pass setting is identifi ed according to the application and the carbonate hardness identifi ed
on the basis of the by-pass and capacity table (Chapter 7). The by-pass is then set on the by-pass
screw
19
as follows:
Turn the by-pass screw
19
until the desired by-pass (050%) agrees with the marking.
!
Caution: Use Allen key 6mm or 7/32".
5.4 Flushing/Bleeding Filter Systems with and without Measuring and Display Unit
Note: A 10 litre bucket is required for fl ushing/draining.
Position fi lter system horizontally.
Completely open fl ush valve
9
.
Open the inlet valve
7
at inlet hose
6
while holding the fl ush hose in the
bucket. Flush quantity at least 10 litres with a minimum volumetric fl ow of 3 l/
min (180 l/h).
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brita PURITY 600 Quell ST at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brita PURITY 600 Quell ST in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 5,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info