497163
32
Zoom out
Zoom in
Previous page
1/142
Next page
30
Stand on the kick loops
12
with both feet while opening the pressure vessel
lid
3
by pressing the lock
15
and turning it anticlockwise as far as it will go.
The fi lter cartridge
2
is released by pressing on the mantle handle
16
.
Place the pressure vessel lid
3
vertically on both lid handles
20
.
Note: Do not turn the lid horizontally on its head.
Stand on the kick loops
12
with both feet while turning the pressure vessel
1
anticlockwise by
the mantle handles
16
as far as it will go.
Take your feet off the kick loops
12
and press the pressure vessel
1
down with both hands on
the mantle handles
16
.
Remove exhausted fi lter cartridge
2
from the pressure vessel
1
.
Place the exhausted fi lter cartridge
2
in the sink with the connection facing down to drain the
remaining water (> 5 min.).
Lock the exhausted fi lter cartridge
2
with the transport protective cap
18
of the new fi lter
cartridge and return in the original packaging to the appropriate BRITA address listed on the
back of the cover.
6.2 Inserting the Filter Cartridge
Check that the O-ring seal of the fi lter cartridge
2
is correctly seated in the
groove and also check for dirt and damage.
Note: The cartridge seat has been lubricated with food-safe lubricant at the
factory.
Check the connector seat of the fi lter cartridge O-ring
2
in the pressure vessel
lid
1
for dirt and damage.
Place the new fi lter cartridge
2
in the pressure vessel
1
.
Stand on the kick loops
12
with both feet, lift the pressure vessel
1
turning it
clockwise until the mantle handle
16
is over the kick loops
12
.
Stand on the kick loops
9
with both feet and place the pressure vessel
lid
3
on the pressure vessel
1
. The positioning of the arrow marking on the
lid handle
20
must line up with the “INSERT” groove.
Press the pressure vessel lid
3
down and turn clockwise until the lock
15
engages.
Switch on power supply to the terminal device (plug).
To ush and bleed the new fi lter cartridge
2
carry out the steps described under 5.3.
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brita PURITY 1200 Steam at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brita PURITY 1200 Steam in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 3,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info