Manual Brita PURITY 1200 Steam (page 25 of 142) (English, German, Dutch, Danish, French, Italian, Polish, Spanish)

497163

Zoom out

Zoom in

1/142

4.2 Assembling the Pressure Vessel and the Pressure Vessel Lid

• Stand with both feet on the kick loops

• Lift the pressure vessel

and turn it clockwise until the mantle handles

are over the kick loops

• Remove the transport protective cap

from the ﬁ lter cartridge.

• Check that the O-ring seal of the ﬁ lter cartridge

is correctly seated in the

groove and also check for dirt and damage.

Note: lubricant at the factory.

• Stand on the kick loops

with both feet and place the pressure vessel lid

on the pressure vessel

. The position of the arrow marking on the lid

handle

must match the “INSERT” groove.

• Press the pressure vessel lid

down and turn clockwise until the lock

engages.

4.3 Assembly of Inlet and Outlet Hoses

Note: The inlet and outlet hoses are not included in the standard scope of delivery. The use of

BRITA hose sets is recommended (Chapter 13).

• Fit inlet hose

at the inlet of the connector head

and outlet hose

at the outlet of the con-

nector head

Note: Inlet “IN” and outlet “OUT” of the connector head

are equipped with O-rings as

seals, therefore no additional ﬂ at seals may be used here. Check that the O-rings are seated

correctly.

Caution: The max. tightening torque at the 1" and 3/4" connections must not exceed 15 Nm!

Only hose connections with ﬂ at seals may be used. Hoses with conical screwed connections dam-

age the ﬁ lter head connections and invalidate any guarantee claims. Only hoses that comply with

DVGW-W 543 may be used to connect the device.

Before assembly, note the direction of ﬂ ow on the upper side of the ﬁ lter head, “IN” = water inlet,

“OUT” = water outlet. Prior to installation, note installation dimensions and operating position

(Chapter 12). If no original hoses are used, the 1"–3/4"

adapter supplied must be used to ensure

the return valve is sealed correctly (pre-ﬁ tted in the water inlet).

5 Commissioning a New Filter

5.1 Bypass Setting for Filter Systems without and with Measuring and Display Unit

• Identify the local carbonate hardness in German hardness °dH (BRITA nomenclature °KH) using

the enclosed carbonate hardness test.

• Check the bypass setting on the bypass screw

Note: The bypass has been set to Position 1 in the factory, and must be changed to suit the

local carbonate hardness and the application (Chapter 7).

5.2 Commissioning the Filter Systems with Measuring and Display Unit

Representation in operating mode

Local Carbonate

Hardness Set

Type/

By-Pass Proportion

Date Field: Installation or

last ﬁ lter change date

Available residual

capacity in litres

Bar Display

Flow Symbol

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Brita PURITY 1200 Steam in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 3,93 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Brita PURITY 1200 Steam Manual

Product: