504588
10
Zoom out
Zoom in
Previous page
1/54
Next page
8
Declaration of Conformity
The BRITA FlowMeter complies with the regulations of the CE directives.
The declarations of conformity required for this can be requested from the BRITA branch
responsible (see back).
2 General Information
2.1 Function and Application
The BRITA FlowMeter calculates the residual capacity of your fi lter system. After inputting
the relevant fi lter capacity and by recording the volumetric fl ow, the BRITA FlowMeter will
calculate the residual capacity of your fi lter system. If the fi lter capacity is exhausted, the
capacity is displayed as negative and fl ashes. Parallel to this is a timer that displays the
recommended replacement of the fi lter cartridge by fl ashing the residual capacity after
max. 12 months. This ensures that the fi lter cartridge is changed on time.
The food quality provided by the BRITA FlowMeter has been inspected and confi rmed by
independent institutes.
2.2 Guarantee Provisions
The BRITA FlowMeter is subject to a statutory guarantee of 2 years. A guarantee claim
may be asserted only if all instructions in this handbook are observed and followed.
The sensor housing
1
and the electronics cover
17
in the display unit must never be
opened. If this provision is not observed, all guarantee claims shall become void.
2.3 Storage/Transport
Adhere to the ambient conditions in the Technical Data (Chapter 11) for storage and
transport.
The Manual should be seen as part of this product and kept for the whole service life of
the BRITA FlowMeter and passed on to subsequent owners.
2.4 Recycling/Disposal
The packaging material of this product is suitable for recycling and can be used again.
Please dispose of all materials in accordance with your local regulations.
The battery and the BRITA FlowMeter must not be burnt and must not be disposed of in
domestic waste; please hand in the batteries and the appliance to the collecting points
designed for this purpose in line with the local regulations.
1 Defi nition of Terms
1
Sensor
2
Outlet external thread G 3/8"
3
Seal 3/8" 2mm
4
Outlet hose
5
Inlet union nut G 3/8"
6
Seal 3/8" 2mm
7
“PROG” button
8
Display
9
“RESETbutton
10
Display unit
11
Connecting cable 1.5m
12
Housing screw
13
Back of housing
14
Button cell 3VDC, Type CR2032
15
Seal PG screw
16
PG cable screw
17
Electronics cover
18
Connecting terminal
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brita FlowMeter 10-100A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brita FlowMeter 10-100A in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 1,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info