497154
10
Zoom out
Zoom in
Previous page
1/32
Next page
10
Before rst use
Do not immerse the bread maker or power cord and plug in water or any other
liquid.
Before using your breadmaker for the rst time, wash the inside of the bread pan and the
kneading paddle with hot, soapy water. Rinse and dry thoroughly.
Using a damp cloth or sponge, wipe the interior of the breadmaker, the inside of the lid
and the exterior of the breadmaker. Use only a mild detergent solution.
Wash the measuring spoon and measuring cup with hot, soapy water, then rinse and dry
them thoroughly.
Using
Never exceed the maximum capacity of your bread maker (2.0lb). Place your
bread maker away from direct sunlight, draughts, or heating appliances and
radiators. These can adversely affect the operation of your bread maker and spoil
the results.
1. Lift the bread pan out of the bread maker using its handle.
2. Fit the kneading/mixing paddle onto the shaft in the bottom of the bread pan. The
shaft has a attened side to grip the paddle when it is rotating. Align the paddle with
the at on the shaft and press it down.
3. Pour the liquid ingredients into the bread pan. Add the rest of the ingredients to the
bread pan in the order listed in the recipe. Weigh all of your ingredients accurately
because incorrect measures will produce poor results.
Do not let the yeast come into contact with the salt or water prior to mixing, as this
will prevent the dough from rising properly (the water will activate the yeast before
the ingredients are properly mixed and kneaded). When using the delay timer, make
a small well in the mound of our and put the dry yeast into it.
4. Fit the bread pan into the oven chamber and push down to lock it into position. Lower
the bread pan handle and close the bread maker lid.
5. Plug your bread maker in to the mains supply socket. Your bread maker will beep
and select the default program (program 1).
6. Press the Menu button until the required program is selected. If the program permits,
select the loaf size and crust colour using the Loaf and Colour buttons.
7. Press the On/Off button. Your bread maker will start to run the selected program. To
stop or cancel the program press the On/Off button for approximately 2 seconds.
8. At the end of the baking cycle your bread maker will beep. Unplug your breadmaker
and, using oven gloves, lift the bread pan out of your bread maker.
9. Turn the bread out onto a wire rack and leave it to cool for at least 30 minutes.
10. Clean the bread pan and kneading/mixing paddle immediately after use—see
cleaning.
using your bread maker
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Breville VBM 003 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Breville VBM 003 in the language / languages: English as an attachment in your email.

The manual is 0,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info