787960
15
Zoom out
Zoom in
Previous page
1/16
Next page
15
Motor appears to
stall during juicing Wet pulp can build up under the juicer cover and stall the appliance if the
appliance is used excessively without cleaning. If this occurs, disassemble and
follow the cleaning instructions to clean the filter bowl surround, the stainless-
steel filter basket and the juicer cover. The appliance can also stall if excessive
force is used to push produce down the feed chute. If this occurs, ensure that a
gentler pressure is used to push produce down the chute.
Turn on the appliance before putting ingredients in the chute. Pressing
ingredients down before the motor reaches full speed can cause it to stall
or overload. Use gentle to moderate pressure on the pusher. Lower pressure
produces a better juice yield.
Hard fruit and vegetables will put excess strain onto the motor if a low speed
is selected. Refer to the reference guide to determine the correct speed for the
fruit and vegetables selected for juicing.
All control panel lights
flash and Overload
Protection displayed
on LCD screen
This indicates motor overload protection is activated due to motor
overheating or stalling.
To reset the protector, unplug from the power supply, then plug back in and
turn on.
If overload protection is still displayed, unplug the appliance and leave to
cool for at least 30 minutes, then try again. The appliance must be unplugged
while cooling in order to reset properly.
If the issue persists after allowing to cool, this indicates an internal problem.
Please call Breville Customer Service or your nearest Authorised Breville
Service Centre.
Note that triggering the overload protection indicates abnormal use of
the appliance, such as too much load in the blender jug, excessive push
force when juicing or extended continuous use. Please take note of the
conditions and refer to all of the information in these instructions to avoid this
occurrence and extend the life of the appliance.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Breville BJB815 - the 3X Bluicer Pro at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Breville BJB815 - the 3X Bluicer Pro in the language / languages: English as an attachment in your email.

The manual is 1.18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info