768251

Brevi Tao Manual

32
Zoom out
Zoom in
Previous page
1/140
Next page
32
Remove the connector from the hole at the 7. end of the backrest.
Attach the front end of the strap to the har-8. ness group connector, passing it under the
base of the child car seat (Pic. 18).
Turn the spacer in the compartment under 9. the base.
Store the harness group in a safe place so 10.
they may be reused if necessary.
To reattach the harness group to the child car 11. seat, repeat the steps carried out for removal
in the reverse order.
Place the child car seat on the appropriate 12.
seat in the vehicle, facing forward.
Ensure that the backrest of the vehicle’s 13.
seat, if adjustable, is locked in the upright
position.
Make sure the vehicle’s seat is set to the fully 14.
back position.
Push the child car seat up against the back of 15.
the vehicle’s seat.
Place the child in the child car seat and fa-16.
sten the safety harness, making sure that
both sections of the harness (lap and diago-
nal) are passed through the harness guide
on the armrest closest to the buckle of the
safety harness (Pic. 19).
The diagonal section of the harness must 17.
be passed through the harness guide of the
headrest, above the child’s shoulders, but
without coming into contact with the child’s
neck.
Tighten the diagonal section of the harness 18.
by pulling it upwards until it is taut and make
sure the child is securely positioned in the
child car seat and on the vehicle’s seat.
Adjusting the vehicle’s seat belt
On this child car seat, the safety harness po-
sition is adjusted by moving the headrest up-
wards or downwards since the harness guide is
joined to it. When adjusting the headrest, make
sure the diagonal harness goes over the child’s
chest, properly restraining the shoulders but
without resting on the child’s neck.
Adjusting the headrest
Proper adjustment of the harnesses and he-
adrest will ensure maximum protection of the
child.
WARNING: the headrest can only be raised
after the two “P” buttons on the backrest’s li-
ning have been released (Fig.5). To raise the
headrest: simply pull the handle located on the
upper part of the back of the headrest. (Pic.
20). To lower the headrest: use the lever (Pic.
20-1) on the rear of the backrest, moving it
downwards until it is properly adjusted (Fig.20-
2). Release the lever to lock the headrest in
the desired position. Always ensure the safety
harness is taut, pulling the diagonal part up-
wards and make sure it is not twisted. If the
safety harness comes into contact with the
child’s neck or if it does not pass above their
shoulder, adjust the height of the headrest as
described in Pic. 20. Always make sure the
GB
… 32 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brevi Tao at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brevi Tao in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Swedish, Spanish as an attachment in your email.

The manual is 1,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info