Manual Brevi Tao (page 31 of 140) (English, German, Dutch, French, Italian, Polish, Portuguese, Swedish, Spanish)

768251

Zoom out

Zoom in

1/140

child car seat, until the harnesses properly

adhere to the child’s body in a comfortable way

(Fig. 10). The harnesses must be tight enou-

gh so that the child is held in position but they

should not cause discomfort or distress.

Loosening the harnesses

Press the release button on the front of the 1. seat (1) (Pic. 11).

Holding down the button, pull forward the har-2. nesses above the shoulders (2) (Pic. 11).

Attention: the buckle between the legs has a

ﬁxed position and cannot be adjusted. Do not

pull the shoulder straps. Make sure that no part

of the harness group is twisted.

Determining the proper height of

the shoulder harnesses

Always make sure that the openings in the

backrest through which the harnesses are pas-

sed are at shoulder level or just slightly above

shoulder level (Pic. 12). The backrest has two

harness positions (a - b) that must be used

according to the child’s height. To change the

position of the harnesses, unfasten them from

the harness group connector (Pic. 13) and

remove them from the backrest, together with

the shoulder straps; then, repeat these steps in

reverse order from the new position.

Inclining the child car seat

The backrest is secured at the base and is able

to adjust its incline depending on the angle of

the vehicle’s seat. However, the angle of the

backrest with respect to the seat can be incre-

ased to make travel more comfortable for the

child. This additional adjustment is achieved

using the spacer that, moving the seat forward,

increases the incline of the backrest.

Turn the child car seat upside down and turn the

spacer under the seat to the open position (Pic.

14). Place the child car seat on the appropriate

vehicle seat and push it up against the back of

the seat. Secure the child car seat with the ve-

hicle’s seat belts as previously described.

USING THE Child car seat - FROM 15 TO

36 KG

(Field of application: approxi-

mately from 3 to 11 years).

Remove the harness group before installing the

child car seat.

Unfasten both harnesses from the connector 1. located on the rear of the backrest.

Remove both harnesses from the backrest, 2. sliding them through the slots in the backrest

(Pic. 15).

Remove the harness between the legs and 3. the shoulder harnesses by passing the ends

through the slots under the seat base and in

the cover of the seat itself (Pic. 16).

Pull the adjustment strap until the connector 4. (Pic. 1-m) is near the rear of the child car seat

(Pic. 17).

Once the harness group has been removed, 5. secure the adjustment strap to the base of

the child car seat.

Turn the partial incline spacer of the backrest 6. to the open position.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Brevi Tao in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Swedish, Spanish as an attachment in your email.

The manual is 1,25 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Brevi Tao Manual

Product: