771777

Bresser LED - LG-Serie Manual

12
Zoom out
Zoom in
Previous page
1/16
Next page
12
2. Turn on the device with the On/Off switch (Fig. 2, D) for 12V
DC power supply.
1.3. V-Lock Li-Ionen battery (optional)
NOTE!
The manufacturer is not liable for voltage damage due to the
use of an improper accumulator.
1. Push the battery5 into the V-Lock holder (Fig. 2, I) at the light
housing until it locks into place.
2. Turn on the device with the On/Off switch (Fig. 2, B).
Operation
Models LS standard and LG standard (Fig. 2+3)
1. Turning on the device
1. Open the barn doors (Fig. 3, M).
2. Turn on the device with one of the two On/Off switches
(Fig. 2, B/D) according to the selected power source. An
acoustic signal sounds.
3. Adjust the brightness with the stepless dimmer.
2. Adjusting the brightness
The brightness can be adjusted with the dimmer (Fig. 2, C).
The changing of the setting from the current to the next level
is proceeded in an eye-saving way with a low dimming speed.
3. Aligning the light source
1. Loosen the fixing screws for the U-bracket
(Fig. 2, G).
2. Move the LED panel light into the desired position.
3. Tighten the fixing screws for the U-bracket handtight.
4. Turning off the device
1. Turn off the device by moving one of the two On/Off switches
(Fig. 2, B or D, according to the selected power source) to
position '0'.
2. Let the device cool down.
5. Remote control (optional accessory)
1. Turn on the device with one of the two On/Off switches
(Fig. 2, B/D) according to the selected power source. An
acoustic signal sounds.
2. Follow the instructions in the manual for the remote control6
to set-up a remote connection with the lighting unit.
Models LS bi-color and LG bi-color
1. Turning on the device
1. Open the barn doors (Fig. 3, M).
2. Turn on the device with one of the two On/Off switches
(Fig. 2, B/D) according to the selected power source. An
acoustic signal sounds.
3. If the LEDs will not light after switching the device on (LCD
shows „OFF“), press the adjustment knob (Fig. 2, C) for the
LED brightness to turn on the LED panel light manually.
2. Adjusting the colour temperature and brightness
The colour tempearture and brightness of this LED panel light
can be set individually. Therfore the colour temeprature can be
set autmatically or manually. Select from the available modes by
pressing the adjustment knob for the colour temperature (Fig.
2, K). The changing of the setting from the current to the next
level is proceeded in an eye-saving way with a low dimming
speed.
2.1. Automatic colour temperature setting (F1)
Press the adjustment knob (Fig. 2, K) for colour temperature
several times until the LCD shows „F1“. The set colour
temperature (3200K – 5600K) is shown in the upper right
display area. Change the colour temperature in steps of 100K
by turning the colour temperature controller (Fig. 2, K). The set
brightness is shown in the lower right display area. Change the
brightness in steps of 1 by turning the dimmer controller (Fig.
2, C). The adjustment range is between 10 and 30. 10 stands
for the lowest and 30 for the highest value.
2.2. Manual colour temperature setting (F2)
Press the adjustment knob (Fig. 2, K) for colour temperature
several times until the LCD shows „F2“. The brightness of the
orange LED elements is shown in the upper right display area.
Change the brightness of the orange LEDs in steps by turning
the colour temperature controller (Fig. 2, K).
The brightness of the white LED elements is shown in the lower
right display area. Change the brightness of the white LEDs in
steps by turning the dimmer (Fig. 2, K).
The adjustment range for both LED groups is between 0.1 and
30. 10 stands for the lowest and 30 for the highest value. If the
value is 0, the respective group of LEDs is switched off.
3. Aligning the light source
1. Loosen the fixing screws for the U-bracket
(Fig. 2, G).
2. Move the LED panel light into the desired position.
3. Tighten the fixing screws for the U-bracket handtight.
4. Turning off the device
1. Press the adjustment knob (Fig. 2, C) for the LED brightness
to turn off the LED panel light. The LCD shows „OFF“.
2. Turn off the device by moving one of the two On/Off switches
(Fig. 2, B or D, according to the selected power source) to
position '0'.
2. Let the device cool down.
5. Remote control (optional accessory)
1. Turn on the device with one of the two On/Off switches
(Fig. 2, B/D) according to the selected power source. An
acoustic signal sounds.
2. Follow the instructions in the manual for the remote control6
to set-up a remote connection with the lighting unit.
Optional accessories
Wireless remote control YK-2
Art. No. F001186
- Wireless control (up to 60 meters)
- For brightness and colour temperature settings
- Operation up to 9 devices of the same series with only one
remote control
V-Lock Li-Ion battery 190Wh
Art. No. F001631
- V-Lock connection
- Displaying the remaining battery powerRestladung
- Voltage: 14,8V
- Capacity: 190Wh
Much more accessories such as light modifiers, tripods and
bags available in our webshop at
www.photostudio-equipment.com
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bresser LED - LG-Serie at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bresser LED - LG-Serie in the language / languages: English, German as an attachment in your email.

The manual is 1.42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info