771777

Bresser LED - LG-Serie Manual

11
Zoom out
Zoom in
Previous page
1/16
Next page
11
diffusion filter is delivered with nthe purchase and allows for
a glare-free and diffuse light. In addition, a variety of suitable
accessories are available to meet specific lighting requirements.
Features of the BRESSER LS/LG Series
1. Energy-saving and durable LED light
2. High luminosity due to its extreme bright LEDs with RA>85
3.
Colour temperature: 3,200K to 5,600K adjustable (LS/LG
bi-color) or 3,200K/5,600K changeable with colour filter
(LS/LG standard)
4. Optimal adaption of the luminosity with dimmer (10% - 100%)
5. High durability (approx. 50,000 hours)
6. Low heat generation and low power consumption; suitable
for long-term lighting
7. Perfect light control through four barn doors
8.
Power supply: 200V to 240V AC at 50Hz with power cable or
12V DC with suitable mains adapter1 or 12V DC with V-Lock
batteries2 (e.g. Sony V-Lock) through the integrated adapter
9. Chnaging of the lighting angle through U-bracket
10. Lightweight housing
11. Standard connection for light stands
Overview control and lighting unit
Models LS standard and LG standard (Fig. 2+3)
A: Socket for 12V DC power supply
B: On/Off switch for mains voltage
C: Stepless dimmer for LED light with On/Off switch
D: On/Off switch for DC power
E: C13 socket for power cable
F: Fuse holder
G: Fixing screws for U-bracket
H: Fixing screw for stand
I: V-Lock connection (nicht bei LS-1200)
L: LED illumination panel (firmly installed)
M: Barn doors
N: Diffusion filter plate
O: Colour filter plate 3,200K
P: Holder for filter plate
Models LS bi-color and LG bi-color (Fig. 2a + 3)
A: Socket for 12V DC power supply
B: On/Off switch for mains voltage
C: Stepless dimmer for LED light with On/Off switch
D: On/Off switch for DC power
E: C13 socket for power cable
F: Fuse holder
G: Fixing screws for U-bracket
H: Fixing screw for stand
I: V-Lock connection (nicht bei LS-1200)
J: LCD
K: Stepless colour temperature controller with selector switch
L: LED illumination panel (firmly installed)
M: Barn doors
N: Diffusion filter plate
P: Holder for filter plate
Preparation and maintenance
Mount the LED panel light on a light stand with sufficient load-
bearing. Vertically align the lighting. Open the barn doors and
and insert the desired filter plate sidewards. Make sure the filter
is completely installed in front of the panel light.
1. Changing the fuse (Fig. 4)
GEFAHR EINES STROMSCHLAGS!
Disconnect the device from the power supply (remove plug or
remove batteries) beforr changing the fuse!
1.
Open the fuse slot with a flat head screwdriver as shown on
the image. The spare fuse is stored in a tube in front of the
currently used fuse.
2. Insert the new fuse in the lower holder and put it back into
the fuse slot.
2. Changing the light source
NOTE!
The LED illumination ist firmly installed and can therefore not be
changed. In case of a defect, please contact the Service Hotline.
3. Installing a diffusion filter or colour filter (only for
models LS standard and LG standard) (Fig. 5)
NOTE!
Remove the protection foil from both sides of the filter plate
before installing it.
Make sure the filter plate is clamped behind the upper, lower and
left handed holders (Fig. 5, P) when inserting it.
1. Turn off the device and let it cool down.
2.
Open the right barn door (Fig. 3, M) so that it is standing upright.
3. Insert the filter plate (Fig. 3, N oder O) from right to left behind
the barn doors in front of the illumination panel.
4. Installing a softboxen (optional) (Fig. 6)
1.
Turn off the device and let it cool down.
2. Open the barn doors (Fig. 3, M) and remove the filter plate
(Fig. 3, N or O).
3.
Slide the softbox3 holders over the barn doors and fix them
with the straps on the fixing screws of the U-bracket (Fig. 2, G).
4. Add the softbox3 to the holders.
Startup procedure/Turning on the device
1. Power supply
NOTE!
Depending on the model, up to three different types of power
supply are available for the LED panel lights. Only one type of
power supply can be used. If using more than one power source
simultaneously (e.g. AC mains voltage and 12V DC power) the
light or devices that have been added to it will be damaged. A
connected battery can not be charged with the light.
1.1. AC mains voltage (recommended)
1. Put the C13 coupling of the power cable into the C13 socket
(Fig. 2, E) at the light housing.
2. Put the Euro plug of the power cable into the power outlet
(240V max. voltage).
3. Turn on the device with the On/Off switch (Fig. 2, B) for AC
mains voltage.
1.2. DC voltage (optional)
NOTE!
The manufacturer is not liable for voltage damage due to the
use of an improper accumulator.
1. Put the plug of the 12V power adapter cable4 into the slot for
12V DC power supply (Fig. 2, A) at the light housing.
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bresser LED - LG-Serie at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bresser LED - LG-Serie in the language / languages: English, German as an attachment in your email.

The manual is 1.42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info