784615
9
Zoom out
Zoom in
Previous page
1/88
Next page
9
EN
ADDITIONAL WIRELESS SENSOR(S) (OPTIONAL)
The console can support up to 7 wireless sensors.
1. In the new wireless sensor, slide the Channel switch to a new CH number
2. Press the [ RESET ] key on the new sensor.
3. At the back of the console, press the [ SENSOR / WI-FI ] key enter sensor synchronization
mode
4. Wait for the new sensor(s) to pair up with the console. (about 1 minute)
5. Once the new sensor(s) are connected to the console successfully, their temperature and
humidity will be shown accordingly.
NOTE:
- Channel number of the sensor must not be duplicated among the sensors. Please refer to “INSTALL
Wireless thermo-hygro SENSOR” for details
- This console can support di󰀨erent type of additional wireless sensor(s), e.g. soil moisture. If you would
like to pair up additional sensors, please check with your retailer for more detail.
SENSOR(S) RESYNCHRONIZATION
Press the [ SENSOR / WI-FI ] key once for the console to enter sensor Synchronization mode
(channel number blinking), and the console will re-register all the sensors that have already been
paired to it before.
REMOVE WIRELESS SENSOR
User may manually delete any sensor from the console.
1. Press the [ CHANNEL ] key until the console shows the display of the selected sensor.
2. Press and hold [ REFRESH ] key for 10 seconds, until its readings are reset " -- , -°C -- % " is
shown.
BRESSERSMART APP
ACCOUNT REGISTRATION
The console works with the BresserSmart App for Android and iOS smartphones.
1. Scan the QR code to go to the BresserSmart download page.
2. OR Download the BresserSmart App from Google Play or Apple
App store.
3. Install the BresserSmart App.
4. Follow the instructions to create your own account using phone
number or email.
5. Once the account registration is completed, the Home Screen
will be shown.
Scan to Download
BresserSmart App for
Android / iOS
NOTE:
- There is no Registration code needed if email method is chosen.
- The App may be subject to change without notice.
- You may be prompted to allow the App to have access to your location. This will allow the app to give you
general weather information in your area. The app will still work if you don' t allow access to that.
CONNECT WEATHER STATION TO WIFI NETWORK
1. Press and hold the [ SENSOR / WI-FI ] key for 6 seconds to enter AP mode manually, indicated
by blinking AP and . When the console is power up for the rst time, the console will
automatically enter and stay at AP mode.
2. Open BresserSmart App and follow the in-app instructions to connect weather station to your
Wi-Fi network.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bresser 7006300 - Tuya Smart at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bresser 7006300 - Tuya Smart in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 6.53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info