Manual Bresser 7006300 - Tuya Smart (page 7 of 88) (English, German, Dutch, French, Spanish)

784615

Zoom out

Zoom in

1/88

WIRELESS THERMO-HYGRO SENSOR

1. LED indicator

2. Wall mounting holder

3. Channel slide switch

4. [ RESET ] key

5. Battery compartment

1 2

INSTALLATION AND SETUP

INSTALL WIRELESS THERMO-HYGRO SENSOR

1. Remove the battery door of the sensor.

2. Use the channel slide switch to set the channel number for the

sensor (e.g. Channel 1)

3. Insert 2 x AA size batteries into the battery compartment according

to the polarity marked on the battery compartment, and close the

battery door.

4. The sensor is in synchronization mode, and can be registered to the

console within the next few minutes. The transmission status LED

will begin to ash every 1 minute.

NOTE:

- If you need to re-assign the sensor channel, slide the channel slide switch to the new channel position

and press [ RESET ] key on the sensor for the new channel number to be e󰀨ective.

- Avoid placing the sensors in direct sunlight, rain or snow.

- To avoid the sensor/s and console pairing failure during new console setup, please power up the

sensor(s) rst, and then press [ SENSOR/WiFi ] key on the main unit.

PLACING THE WIRELESS THERMO-HYGRO SENSOR

Place a screw on the wall that you wish to hang the sensor on.

Hang the sensor onto the screw by the wall mounting holder. You

can also place the sensor on a table by itself.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bresser 7006300 - Tuya Smart in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 6.53 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bresser 7006300 - Tuya Smart Manual

Product: