729991
13
Zoom out
Zoom in
Previous page
1/20
Next page
13 / 20
19 Receiving measurements automatically
Once batteries are installed, the base station will display the measurement readings. Readings from
the remote sensor will be displayed within 3 minutes after powering it on.
20 Temperature alarm setting
1. In normal time display mode, press DOWN button for approx. 2 seconds to enter temperature
alarm time setting mode.
2. Digits to be set are flashing.
3. Settings order: ON/OFF (Temperature alarm on/off) > Temperature highest limit > Temperature
lowest limit > Exit
4. Press UP or DOWN button to change the value.
5. Press SET button to confirm and continue to the next setting.
6. The temperature settings mode will be quit automatically after 30 seconds of inactivity. All settings
done before will be saved.
7. When outdoor temperature reaches highest or lowest limit, the temperature alarm symbol will flash
and an alarm will sound for approx. 3 seonds. This will be repeated with an interval of 1 minute un-
til the temperature has fallen below the limit again.
NOTICE!NOTICE! Select temperature alarm OFF from the temperature settings mode to dis-
abled the temperature alarm permanently.
21 Precipitation
The precipitation which was collected over a certain period is displayed on the base station in milli-
meters or inches and is based on the current precipitation rate.
Rainfall rate Daily rainfall Weekly rainfall Monthly rainfall
Select display mode
Press the RAIN button several times until the desired time range is displayed:
RATE Current precipitation rate in the past hour
DAILY Total precipitation rate of the current day, measured from midnight
WEEKLY Total precipitation rate of the current week
MONTHLY Total precipitation rate of the current month
Select measurement unit (millimeters or inch)
1. Press the RAIN button for approx. 3 seconds to change to measurement unit settings.
2. Press UP or DOWN button to change between mm (millimeters) and in (inch).
3. Finally press the RAIN button to save the settings and exit the setting mode.
NOTICE!Readings are updated automatically every 6 minutes.
22 Set weather status and air pressure above N.N
NOTICE!For a correct display of the weather forecast, the current weather status and the air
pressure above N.N. must be set correctly immediately after commissioning. The first weather
forecast will be displayed approximately 6 hours after the set-up.
13


Need help? Post your question in this forum.

Forumrules
1

Forum

bresser-7002420-climatemp-xxl

Reset search

  • Windrichtung lässt sich nicht einstellen. Beim Bestätigen geht die Anzeige immer zurück auf Süd. Was kann ich tun? Submitted on 16-12-2022 at 11:52

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bresser 7002420 ClimaTemp XXL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bresser 7002420 ClimaTemp XXL in the language / languages: English as an attachment in your email.

The manual is 3,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bresser 7002420 ClimaTemp XXL

Bresser 7002420 ClimaTemp XXL User Manual - German - 16 pages

Bresser 7002420 ClimaTemp XXL User Manual - Dutch - 20 pages

Bresser 7002420 ClimaTemp XXL User Manual - French - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info