771286
30
Zoom out
Zoom in
Previous page
1/56
Next page
30 / 56
Under your phone settings -> Apps & notifications --> Permissions -> WeatherSense, Make sure
your phone location services are turned on. Go to “set individual permissions”, Make sure “access
location info” and "Access list of installed apps" service are turned on.
Make sure your phone BLUETOOTH function is on. Refresh in the device list until “weathertype”
appears in the new device list.
Try re-pairing again, by restarting your phone WLAN function, app and weather Station device.
Q: Why does the app notify "The device is already bound by another account"?
The device has been reconfigured or tested in the factory.
Reconfigure the device with your home WIFI network.
12 Automatic time setting
After the power supply and the Wi-Fi connection are established, the time and date information is
automatically transmitted by the Internet time server.
If the reception is correct, the date and time are set automatically and the time transfer icon will be dis-
played.
If there is no automatic time setting, there may be a problem with the Wi-Fi connection. Read the
chapter "Troubleshooting" for possible solutions.
If the automatic time setting furthermore is not working, the time must be set manually. Please read
the chapter "Manual time setting and other user-defined settings".
13 Manual time setting and other user-defined
settings
1. Press the Settings/Brightness key for approx. 3 seconds to enter the settings mode.
2. Digits to be set are flashing.
3. Press UP/CH key or DOWN/WIFI key to change the setting.
4. Press the Settings/Brightness key to confirm and switch to the next setting.
5. Settings sequence: Temperature unit (°C or °F) > Air pressure unit (hPa or mb) > Wind speed unit
(km/h or mph) > 12 or 24 hour mode > Time zone (-12 to +12 hours) > Hours > Minutes > Date
display (M/D or D/M) > Year > Month > Day > Language of weekday information
6. Finally, press the Settings/Brightness key to save the settings and exit settings mode.
NOTICE!If no setting is made within 20 seconds, all settings made up to that point are saved
and the base station will switch back to normal display mode. For manual time setting, the Wi-Fi
connection must be disconnected.
14 Alarm setting
1. Press the Alarm key to display the alarm time.
2. Press the Alarm key for approx. 2 seconds to enter the alarm time settings mode.
3. Digits to be set are flashing.
4. Press UP/CH key or DOWN/WIFI key to change the setting.
5. Press the Alarm key to confirm and switch to the next setting.
6. Settings sequence: Hours > Minutes > Snooze interval (5 to 60 minutes or OFF)
7. Finally, press the Alarm key to save the settings and exit settings mode.
8. Move the alarm slider to position to enable the alarm. The symbol will displayed on the LCD.
The alarm is enabled.
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bresser 7001040 - WIFI 4Cast at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bresser 7001040 - WIFI 4Cast in the language / languages: English, German, French as an attachment in your email.

The manual is 2.72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bresser 7001040 - WIFI 4Cast

Bresser 7001040 - WIFI 4Cast User Manual - Dutch - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info